Gloss Metallic Champagne Gold Car Wrap
- Sku: GM62-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
2-Year Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7–10 days (Free) | 5–7 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Film Material & Construction
- Film Type: Premium-grade polymeric calendered vinyl wrap
- Material Structure: Polymeric hybrid vinyl with integrated air-release channels
- Designed Use: Full vehicle wraps and smooth to moderately curved surfaces
- Directional Film: Yes (installation direction must be observed)
- Backing Liner: PET
Thickness
- Vinyl Film Thickness: approx. 0.13 mm
- Total Thickness (with release liner): approx. 0.28–0.30 mm
Adhesive System
Adhesive Type: Solvent-based acrylic adhesive
Adhesive Features:
- Pressure-sensitive
- Transparent appearance
- Designed for automotive exterior use
- Balanced initial tack and repositionability
Adhesive Layer Thickness: approx. 12 μm (dry)
Application & Installation Guidelines
Certain finishes (ultra-gloss, metallic, glitter series) may be firmer than standard vinyl due to surface coating structure. Professional installation is recommended
Recommended Application Temperature
- Installation Environment: +17°C to +25°C
- Service Temperature Range: −45°C to +45°C
Recommended Tools
- Squeegee with soft buffer
- Utility knife
- Masking tape
- Heat gun
- Magnets
- Gloves
- IR thermometer (strongly recommended for accurate post-heating)
Post-Heating Requirements (Critical)
Proper post-heating is essential to release internal film stress and ensure long-term adhesion.
- Flat Surfaces: 110°C
- Curves, Recesses & Overlaps: 130°C
Note: Failure to post-heat correctly may result in edge lifting or shrinkage over time.
Mechanical & Physical Properties (Typical Values)
Elongation at Break:
- MD: ~200%
- CD: ~190%
Tensile Strength:
- MD: ~29 N/mm²
- CD: ~25 N/mm²
Dimensional Stability: ≤ 2% (70°C / 10 min oven test)
Surface Tension: ~34 dynes/cm
Maintenance & Care
- Clean only with pH-neutral automotive shampoo
- Use soft microfiber cloth or touchless wash
- Pressure washing below 2000 PSI only
- Avoid brush-style car washes, abrasive tools, and solvent-based cleaners
- Remove bird droppings, sap, fuel residue, and contaminants promptly
- Vinyl-safe spray wax or sealant only
- Abrasive polish, cutting compounds, ceramic coatings, and overlamination are not recommended
Durability & Warranty
Service life varies by film series, installation quality, environment, and maintenance
Warranty (if applicable) covers material defects only
The following are not covered:
- Improper installation or insufficient post-heating
- Overstretching, overheating, or misuse
- Overlaminate or unapproved surface treatments
- Environmental damage, road debris, or accidents
- Surface imperfections originating from the vehicle’s original paint
Storage & Shelf Life
Indoor or shaded parking is strongly recommended
Shelf Life: Up to 3 years
Storage Conditions:
- Temperature: +10°C to +20°C
- Relative Humidity: approx. 50%
- Store in original packaging
- Keep away from direct sunlight, heat, dust, and moisture
Packaging Information
- Roll Width: 152 cm (60 inches)
- Roll Length: 18 m
- Approximate Roll Weight: 13 kg
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Metallic Champagne Gold Car Wrap
Quick Product Summary
RAXTiFY Gloss Metallic Champagne Gold Car Wrap blends soft gold, beige, and metallic undertones into a smooth gloss finish. Compared with brighter gold wraps, it looks more subtle and upscale, making it ideal for drivers who want a luxury gold color without excessive flash.
Description
Welcome to the ultimate makeover, your vehicle could get with our Gloss Metallic Champagne Gold Car Wrap. From unrivalled style and superior quality to long-lasting durability, this premium product is your perfect solution to give a new look to your car while preserving the original paint. Whether you want to be a head-turner or preserve the resale value of your car, the Gloss Metallic Champagne Gold Vinyl Wrap is meant to deliver more. Here's why this one stands out.
Elegance with Gloss Metallic Champagne Gold
Wrapping your car with Gloss Metallic Champagne Gold is way more than just car wrapping; it's a badge of refined luxury. The gloss metallic finish sets off the lines of the vehicle and reflects light amazingly well, ensuring that your car turns heads wherever it goes. The subtlety of the metallic elements lends to the depth and texture that will accord your vehicle a degree of sophistication that has only been attached to high-class cars.
-
Elegance, Rebranded: Champagne Gold is for those who like tasteful, exclusive things.
- Premium Looks: The metallic finish creates a dimensional shimmer that separates your car from the pack.
Protect Your Investment
Wrapping your car offers not only an uplift in appearance but also provides a robust shield to the factory paint. Your car is protected from minor scratches, road debris, and environmental damages and will be in prime condition.
- Durable Protection: Provides protection against UV rays, small abrasions, and wear and tear.
- Preserve Resale Value: It maintains the market value of your car by preserving the original paint.
Easy to Maintain
Keeping your Gloss Metallic Champagne Gold Car Wrap beautiful is an unusually easy task; its smooth, dirt-resistant surface is regularly washed to remain as brilliant as the day it was applied.
- Easy Cleaning: A quick wash gives a brilliant shine.
- Low Maintenance: No special products or techniques are required.
Affordable Luxury
Achieve a high-end look without a high price tag. Our Champagne Gold Vinyl Wrap is an extremely affordable way to enhance your car's looks and gives a look of luxury at a fraction of the cost of a custom paint job.
- Budget-Friendly: Offers premium looks but in a very affordable manner.
- Cost-Effective Customization: Perfect for both partial wraps and full vehicle coverage.
Limitless Customization Possibilities
From adding an artistic touch to a complete transformation, this vinyl wrap can do it all. Extremely flexible material, easy to apply, and works great with simple and complicated designs.
- Unique Personalization: Customize your wrap as per your liking and style.
- Versatility: Applicable on any model or size of vehicle.
Features Gloss Metallic Champagne Gold Car Wrap:
Bright Reflection Surface
Features an extremely high gloss finish that is engineered to catch and reflect ambient light, giving this Champagne Gold Vinyl Wrap a unique brilliant shine that gets noticed wherever your ride goes.
Refined Metallic Depth
Incorporated metallic components provide a sophisticated depth and luxury feel, transforming the overall look of your vehicle to that of premium high-end quality.
Long-lasting Protection
Besides the great appearance, this Vinyl Wrap comes with durable protection for your car's OEM paintwork, protecting it from UV light, minor scratches and small dings that might help your vehicle to stay in its prime
Ease of Installation
Desirable to work with, this wrap will ensure an effortless application with hardly any hiccups. It is now easier than ever, assuming one has just the right tooling and patience to realize professional-grade results.
Unlimited Flexibility
Whether that be a full vehicle wrap, stylish accents, or custom designs, this Champagne Gold Vinyl Wrap is flexible enough to let your creative vision come alive into reality for a wide range of applications.
More Features
- Premium wrap with superior performance.
- Air-release technology for easy and bubble-free installation
- Easy to apply and maintain.
- Fade-resistant and maintains its glossy appearance
- Durable, waterproof, and resistant to fading and wrinkling
- Removable without leaving any residue.
- Eco-friendly, non-toxic, high-grade polymeric vinyl.
- Suitable for car wraps, motorcycles, boats, bikes, and more
Specifications
- Color: Champagne Gold
- Finish: Gloss Metallic
- Material: High-grade polymetric calendered vinyl film
-
Lifespan: 2-3 years with proper installation and maintenance
-
Recommended Uses: Automotive
-
Shipping Time: Standard shipping: 7-12 days; Faster shipping: 3-5 business days
- Sizes Available: 5ft x 3ft, 5ft x 10ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft, 5ft x 69ft, 5ft x 75ft
FAQs
Q1. What color is Gloss Metallic Champagne Gold Car Wrap?
Gloss Metallic Champagne Gold Car Wrap is a warm metallic gold vinyl wrap that has champagne, beige and light gold undertones. Comparable to bright yellow-gold wraps, but more refined and understated, thereby giving the vehicle a premium luxury look.
Q2. Is Champagne Gold the same as Rose Gold?
Rose Gold will typically be pink with a warmer tone while Champagne Gold will be lighter, softer and more neutral. The champagne gold metallic finish is more sophisticated and refined than the rose gold, which is more avant-garde and expressive.
Q3. Is Champagne Gold brighter than silver?
Champagne Gold is not as cold as silver, but is typically softer than shimmery metallic gold. It falls somewhere in the middle between the two extremes of silver and gold in terms of appearance, and provides a more luxurious sound while avoiding the flashy vibe of the latter.
Q4. What does the gloss metallic finish look like?
The gloss metallic is a smooth, paint-like finish with subtle metallic depth. It absorbs light along the contours and lines of the body, adding depth to the finish of the wrap, which is not the case for flat gloss colors or non-metallic finishes.
Q5. What vehicles look best with Gloss Metallic Champagne Gold?
This color is a great choice for luxury sedans, coupes, SUVs, executive cars and high-end custom builds. It works well with chrome trim, black wheels, silver wheels, tinted windows and clean body lines.
Q6. Is this a good color for executive or luxury builds?
Yes. It is particularly good in executive and luxury style builds, as it looks rather sleek and elegant, yet doesn't sound too loud. It's suitable for sedans, long-wheelbase cars, and high-end SUVs.
Q7. How much does it cost?
There are two options: installing it by yourself or hiring a professional installer, with the cost depending on which option you choose. With DIY projects, the biggest expense is going to be the vinyl roll and tools. The standard cost of a full-car vinyl wrap installation in the U.S. is approximately $2,500 to $5,000+ depending on vehicle size, shop location, complexity of the vinyl panels and experience of the installer.
Partial wraps are less expensive. The cost of installing a hood, roof, mirror or accent wrap can vary from a couple hundred dollars to more than $1,000, depending upon the size and the work.
Q8. What size should I buy for a full car wrap?
The 5ft x 59ft / 1.52m x 18m roll is the standard size to be used for a full wrap on many standard sedans and coupes. If you are making an SUV, truck, van or vehicle with large panels, you may require more material. For beginners, it is advisable to purchase additional film for errors, panel rework and for the more complicated curves.
Q9. How do I maintain Gloss Metallic Champagne Gold Vinyl Wrap?
Use a pH neutral car shampoo, soft microfiber wash mitt and clean water to wash the wrap. Do not use abrasive brushes, strong chemicals, cutting compounds or automatic car washes with hard brushes. Use a clean microfiber matrix to dry surface and minimize water spots.
Q10. Can I wax or ceramic coat this gloss metallic wrap?
Only use products that are vinyl wrap safe. Spray sealants or ceramic coatings which are wrap-safe may be used, but not harsh polishing compounds or products that aren't meant for vinyl. Always test on a small area first.
Is Gloss Metallic Champagne Gold Car Wrap Right for You?
Gloss Metallic Champagne Gold Car Wrap is a sure bet for owners who prefer a warm metallic tone that offers an elegant, premium, yet understated look. The high-gloss surface provides a smooth paint-like appearance, and the champagne-gold color adds a luxurious upscale touch to luxury sedans, coupes, SUVs and custom builds.
This color is more luxurious and warm than silver. It's a little softer than bright gold and simpler in use than you can imagine. For those seeking a gold vinyl wrap that is elegant and sophisticated yet not excessively flashy, RAXTiFY Gloss Metallic Champagne Gold Car Wrap is a great choice.
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of top-tier 130um plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Item Specifications
| RAXTiFY VINYL | Specifications |
|---|---|
| Technology | High-grade polymeric calendered vinyl film with air-release channels |
| Top Protective Liner | PET |
| Thickness (Face only) | 3.7–4.1 mil, face film only |
| Thickness (Adhesive) | 1.6 mil removable pressure-sensitive adhesive with air-release channels |
| Glue | Solvent-based adhesive, low-to-medium tack for easier repositioning |
| Release Liner | PET/Plastic |
| Width (Standard) | 5ft / 60in 1.52m |
| Length (Standard) | 19.7yd / 59ft / 18m |
| Indoor Lifespan | 3 years depending on use and maintenance |
| Outdoor Lifespan | 2 years depending on climate, installation, and maintenance (Except Chrome Wraps) |
Wrap Testing
| RAXTiFY VINYL | Testing Result |
|---|---|
| Dimensional Stability | Shrinkage less than 4% |
| Tensile Strength | 22.7 N/10mm |
| Release Force (N/25mm) | 0.13 N/25mm, tested at 25°C and 50% RH |
| Initial Tack (g/25mm) | 1360 g/25mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength (N/25mm) | 7.02 N/25mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power (h) | 75.09 (25℃ and 50%, GB/T4851-1998) |
| Chemical Resistance | Resistant to mild acids, mild alkalis, and salt. Avoid strong solvents and harsh cleaners. |
| Aging Testing | No adhesive residue after 7 days of heat exposure under 65°C |
| Aging Test 2 | No adhesive residue after 10 days under standard aging conditions |
| Storing Period | 2 years when stored in the original packaging at +10°C to +20°C, 50% RH, away from direct sunlight, in a clean and dry environment |
Application
| RAXTiFY VINYL | Application Advices |
|---|---|
| Recommended Tools | Squeegee with felt edge, microfiber buffer, sharp knife, masking tape, magnets, gloves, heat gun, infrared thermometer |
| Application | Apply using standard dry-wrap techniques for calendered vinyl films. Avoid overstretching and overheating. Post-heating is required on edges, curves, recessed areas, and overlaps |
| Post-heating Temperature | 95°C–110°C for most areas and up to 120°C for curves and overlaps (Except Chrome Wraps） |
| Recommended Installation Area Temperature | 70°F–80°F / 21°C–27°C |
| Directional | All vinyl wraps are recommended to be installed directionally |
| Application Method | Dry Application （Except PPF) |
| Aftercare | Clean with pH-neutral car wash soap and a soft microfiber cloth. Avoid strong solvents, abrasive cleaners, and harsh chemicals |
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!
Frequently Asked Questions
Is RAXTiFY vinyl easy to install?
RAXTiFY vinyl wraps are made in line with professional uses.Others such as high-gloss, metallic, or glitter series are stiffer than the traditional wraps because of surface coating technology.Although the flat panels can be easily installed by the hands of skilled DIY users, it is highly advised that professional installation be done in complex curves and high visibility areas.
Can I apply overlaminate on RAXTiFY vinyl?
Overlamination should be avoided.Other coating layers can have an influence on surface transparency, bonding and durability.The original surface finish of RAXTiFY vinyl is developed to be the last visual coating.
How should I maintain RAXTiFY vinyl wraps?
- Wash using pH-neutral car shampoo
- Use a soft microfiber cloth or touchless wash
- Pressure washers should remain under 2000 PSI
Cleanse up the contaminants e.g. bird droppings, sap of trees or fuel residues as soon as possible to avoid staining.
Can I use wax or polish on RAXTiFY vinyl?
Vinyl specific spray waxes or sealants are only used; these are mostly used in gloss and metallic finishes.Abrasive polishes, cutting compounds or solvent based chemicals are to be avoided.Any product should always be tested on a small and inconspicuous part of the skin before it can be applied.
How long does RAXTiFY vinyl wrap last?
Wrap lifespan depends on multiple factors, including:
- Film series and finish
- Installation quality
- Environmental exposure
- Maintenance habits
Although RAXTiFY films are designed to give non-textured finishes to the vehicle, the end result could depend on the painted state of the vehicle in the first place.The scratches, dents, rust, bubbles or orange peel that may be present before installation may be left and are not regarded as film defect.
Will removing RAXTiFY vinyl damage my paint?
RAXTiFY vinyl wraps should not harm factory paint when used on OEM paint that is in fine condition and removed without causing damage to the paint.
Does storage affect wrap lifespan?
Parking in interior parts or shaded parking areas mean a lot of less exposure to UV and environmental pressure.In case of an indoor storage, a breathable car cover will be recommended, as it will be helpful to maintain the quality of the finish and increase the wrap lifespan.