Super Gloss Baby Blue Car Wrap
- Sku: G46-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
2-Year Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7–10 days (Free) | 5–7 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Film Material & Construction
- Film Type: Premium-grade polymeric calendered vinyl wrap
- Material Structure: Polymeric hybrid vinyl with integrated air-release channels
- Designed Use: Full vehicle wraps and smooth to moderately curved surfaces
- Directional Film: Yes (installation direction must be observed)
- Backing Liner: PET
Thickness
- Vinyl Film Thickness: approx. 0.13 mm
- Total Thickness (with release liner): approx. 0.28–0.30 mm
Adhesive System
Adhesive Type: Solvent-based acrylic adhesive
Adhesive Features:
- Pressure-sensitive
- Transparent appearance
- Designed for automotive exterior use
- Balanced initial tack and repositionability
Adhesive Layer Thickness: approx. 12 μm (dry)
Application & Installation Guidelines
Certain finishes (ultra-gloss, metallic, glitter series) may be firmer than standard vinyl due to surface coating structure. Professional installation is recommended
Recommended Application Temperature
- Installation Environment: +17°C to +25°C
- Service Temperature Range: −45°C to +45°C
Recommended Tools
- Squeegee with soft buffer
- Utility knife
- Masking tape
- Heat gun
- Magnets
- Gloves
- IR thermometer (strongly recommended for accurate post-heating)
Post-Heating Requirements (Critical)
Proper post-heating is essential to release internal film stress and ensure long-term adhesion.
- Flat Surfaces: 110°C
- Curves, Recesses & Overlaps: 130°C
Note: Failure to post-heat correctly may result in edge lifting or shrinkage over time.
Mechanical & Physical Properties (Typical Values)
Elongation at Break:
- MD: ~200%
- CD: ~190%
Tensile Strength:
- MD: ~29 N/mm²
- CD: ~25 N/mm²
Dimensional Stability: ≤ 2% (70°C / 10 min oven test)
Surface Tension: ~34 dynes/cm
Maintenance & Care
- Clean only with pH-neutral automotive shampoo
- Use soft microfiber cloth or touchless wash
- Pressure washing below 2000 PSI only
- Avoid brush-style car washes, abrasive tools, and solvent-based cleaners
- Remove bird droppings, sap, fuel residue, and contaminants promptly
- Vinyl-safe spray wax or sealant only
- Abrasive polish, cutting compounds, ceramic coatings, and overlamination are not recommended
Durability & Warranty
Service life varies by film series, installation quality, environment, and maintenance
Warranty (if applicable) covers material defects only
The following are not covered:
- Improper installation or insufficient post-heating
- Overstretching, overheating, or misuse
- Overlaminate or unapproved surface treatments
- Environmental damage, road debris, or accidents
- Surface imperfections originating from the vehicle’s original paint
Storage & Shelf Life
Indoor or shaded parking is strongly recommended
Shelf Life: Up to 3 years
Storage Conditions:
- Temperature: +10°C to +20°C
- Relative Humidity: approx. 50%
- Store in original packaging
- Keep away from direct sunlight, heat, dust, and moisture
Packaging Information
- Roll Width: 152 cm (60 inches)
- Roll Length: 18 m
- Approximate Roll Weight: 13 kg
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Super Gloss Baby Blue Car Wrap
Quick Product Summary
RAXTiFY Super Gloss Baby Blue Car Wrap delivers a vivid baby-blue finish with super-gloss shine and smooth reflective depth. Inspired by modern performance-car styling, this color works especially well on sports cars, luxury coupes, convertibles, and clean custom builds.
Product Video
Product Description
The Super Gloss Baby Blue Car Wrap is what will make your car stand out as a work of art. The fantastic combination of style, durability, and versatility in this wrap promises to take your car's looks to the next level.
This Super Gloss Baby Blue Car Wrap is more than a vinyl wrap; instead, it's an added fashion statement to your vehicle. This superior wrap truly stands out with its super gloss finish in that cheerful shade of baby blue. The wrap gains the attention of everybody with the captivating color of the gloss blue and the magical dance of light on it. Whether you are looking to give your car a whole new look or just want to make an impression that people will never forget, this wrap is precisely what you need.
Key Features
1. Enchanting Baby Blue Color:
The Super Gloss Baby Blue Car Wrap is upholstered in an envy-making baby blue color that will make people stare in awe at your car whenever you hit the road. It is a color that speaks of class and individuality, making your car one of a kind.
2. Super Gloss Finish:
The super gloss finish brings an air of sophistication to the look of your car. This finish also offers an added layer of protection against environmental elements and minor abrasions to your paint.
3. Durability and Protection:
Our Super Gloss Baby Blue Car Wrap does not stop at looking great but protects your car's paint from minor abrasions and some environmental elements, ensuring the car stays beautiful over time.
4. Easy Installation and Removal:
Due to its air-release adhesive technology, this gloss blue wrap is quick to install. So, whenever you want to modify the look of your vehicle, the car wrap can be removed without harming your car's original paint.
Why Choose RAXTiFY Super Gloss Baby Blue Car Wrap?
More than being a car accessory, the Super Gloss Baby Blue Car Wrap is a medium of expression of your style and individuality. Here is why this wrap is a favorite among all car enthusiasts and especially those who wish to make heads turn:
Distinctiveness: This super gloss baby blue vinyl wrap can make one stand out. With a Super Gloss finish, the added layer of luxury and style is achieved that's pretty hard to match.
Low Maintenance: This wrap keeps your vehicle in top condition. It has an easy-to-clean surface area; hence, your car can always be at its best, with little effort.
Protection: Aside from the marvelous outlook, this wrap car offers protection to keep the car away from any disvaluation due to scratches or ugliness.
Unlimited Customization: Unleash Your Individuality with Super Gloss Baby Blue Car Wrap; you can make your car uniquely different from other cars.
Resale Value: Your car's resale value is increased by uniqueness and protection; this unique wrap will be valued by any buyer of your vehicle.
FAQs on Super Gloss Baby Blue Car Wrap
Q1: What color is Super Gloss Baby Blue Car Wrap?
Super Gloss Baby Blue Car Wrap is a high gloss vinyl baby-blue car wrap with a clean baby-blue tone. It gives a new, sporty and stylish appearance like popular performance car blue shades.
Q2: Is Super Gloss Baby Blue the same as Miami Blue?
This isn't actually a Porsche Miami Blue paint colour, but it provides a similar high, sporty blue aesthetic. Clean high-gloss surface and a bright light-blue color for sports cars and coupes; Super Gloss Baby Blue.
Q3: What does “super gloss” mean?
Super gloss refers to the paint-like high reflective surface of the wrap. Super Gloss Baby Blue is more reflective than matte or satin finishes, and provides a cleaner, shinier and more polished look to the vehicle.
Q4: What material is this car wrap made from?
Super Gloss Baby Blue Car Wrap is made from automotive calendared vinyl with air-release channels and repositionable adhesive. This allows the film to lay down more smoothly and provides easier control to the installer while applying the film.
Q5: Is Super Gloss Baby Blue Car Wrap easy to install?
Yes, it is made easy for DIY installers. The repositionable adhesive facilitates easy lifting, positioning and realigning of film prior to final press before any trapped air is released through the air-release channels.
Q6: How much does it cost to wrap your car in Super Gloss Baby Blue Car Wrap
The expense varies based on whether you install it or not, or if it's installed by a professional, how much they charge. If you are making your own projects, the largest cost is the vinyl roll and tools. The price of full-car vinyl wrap installation in the U.S. ranges from approximately $2,500 to $5,000+ and is dependent on a variety of parameters including vehicle size, shop location, panel complexity and installer experience.
The smaller the project, the less it will cost. The cost of a hood, roof, mirrors, or accent wrap will vary from a few hundred dollars to more than $1,000 depending on the size of the area and labor involved.
Q7: What size should I buy for a full car wrap?
The standard size for a full wrap is 5ft x 59ft / 1.52m x 18m for many standard sedans and coupes. More material may be required for larger SUVs, cars with complex body kinetics, trucks and vans. Newbies will wish to buy additional film for experimentation and rework.
Q8: How long does Super Gloss Baby Blue Car Wrap last?
Super Gloss Baby Blue Car Wrap can last and typically will last for 2-3 years with proper installation and care. Sun exposure, climate, driving conditions, wash frequency and indoor/outdoor parking all have an impact on lifespan.
Q9: How do I maintain Super Gloss Baby Blue Car Wrap?
Use a pH neutral car shampoo, clean water and soft microfiber wash mitt to wash the wrap. Do not use an abrasive brush, hard chemicals, polishing compounds or automatic car washers using stiff brushes. Use a clean microfiber to dry to minimise water spots.
Q10: Can I wax or ceramic coat this gloss vinyl wrap?
Do not use products that are harmful to vinyl wraps. Some spray sealants or ceramic coatings might be acceptable, but never use harsh spray sealants, cutting polishes or those not meant for vinyl surface. Always test on a small area first.
Q11: Does baby blue vinyl wrap get dirty easily?
Lighter shades of blue will highlight dust, road grime, bugs and water spots better than dark shades. Bright and clean to the color by regular gentle washing. Covered parking or an indoor facility may also help to preserve the finish.
Q12: Will Super Gloss Baby Blue fade in the sun?
As with most vinyl wraps, over time UV exposure can impact color and gloss. The right care, gentle cleaning and the correct parking (shade or inside if at all possible) will make the wrap look good and keep it looking for longer.
Q13: Is Super Gloss Baby Blue better than matte blue?
This depends on the style you wish to achieve. Super Gloss Baby Blue will provide a brighter, cleaner, paint-like look, while matte blue will give a more muted and subtle look. Super Gloss Baby Blue is the more sporty and youthful and eye-catching of the two finishes.
Q14: Should I order a sample before buying a full roll?
Yes. Baby blue might appear different in various light settings, inside and out, as well as exposure to light when taking photos, and body style of the vehicle. When ordering a sample you will be able to check the actual colour and gloss before buying a full roll.
Is Super Gloss Baby Blue Car Wrap Right for You?
For those who want a vivid, clear, sporty color that won't appear too loud or aggressive, Super Gloss Baby Blue Car Wrap is a good option. It's high-gloss surface reflects paint-like and vivid baby-blue color adds a distinct modern look to sports cars, coupes, sedans and custom builds alike.
This colour is lighter, younger and playfull than darker blue wraps. It will have more shine and a more refined look than matte blue. RAXTiFY Super Gloss Baby Blue Car Wrap is an easy option to consider when seeking a vinyl wrap that looks clean and premium, yet is eye-catching while on road.
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of top-tier 130um plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Item Specifications
| RAXTiFY VINYL | Specifications |
|---|---|
| Technology | High-grade polymeric calendered vinyl film with air-release channels |
| Top Protective Liner | PET |
| Thickness (Face only) | 3.7–4.1 mil, face film only |
| Thickness (Adhesive) | 1.6 mil removable pressure-sensitive adhesive with air-release channels |
| Glue | Solvent-based adhesive, low-to-medium tack for easier repositioning |
| Release Liner | PET/Plastic |
| Width (Standard) | 5ft / 60in 1.52m |
| Length (Standard) | 19.7yd / 59ft / 18m |
| Indoor Lifespan | 3 years depending on use and maintenance |
| Outdoor Lifespan | 2 years depending on climate, installation, and maintenance (Except Chrome Wraps) |
Wrap Testing
| RAXTiFY VINYL | Testing Result |
|---|---|
| Dimensional Stability | Shrinkage less than 4% |
| Tensile Strength | 22.7 N/10mm |
| Release Force (N/25mm) | 0.13 N/25mm, tested at 25°C and 50% RH |
| Initial Tack (g/25mm) | 1360 g/25mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength (N/25mm) | 7.02 N/25mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power (h) | 75.09 (25℃ and 50%, GB/T4851-1998) |
| Chemical Resistance | Resistant to mild acids, mild alkalis, and salt. Avoid strong solvents and harsh cleaners. |
| Aging Testing | No adhesive residue after 7 days of heat exposure under 65°C |
| Aging Test 2 | No adhesive residue after 10 days under standard aging conditions |
| Storing Period | 2 years when stored in the original packaging at +10°C to +20°C, 50% RH, away from direct sunlight, in a clean and dry environment |
Application
| RAXTiFY VINYL | Application Advices |
|---|---|
| Recommended Tools | Squeegee with felt edge, microfiber buffer, sharp knife, masking tape, magnets, gloves, heat gun, infrared thermometer |
| Application | Apply using standard dry-wrap techniques for calendered vinyl films. Avoid overstretching and overheating. Post-heating is required on edges, curves, recessed areas, and overlaps |
| Post-heating Temperature | 95°C–110°C for most areas and up to 120°C for curves and overlaps (Except Chrome Wraps） |
| Recommended Installation Area Temperature | 70°F–80°F / 21°C–27°C |
| Directional | All vinyl wraps are recommended to be installed directionally |
| Application Method | Dry Application （Except PPF) |
| Aftercare | Clean with pH-neutral car wash soap and a soft microfiber cloth. Avoid strong solvents, abrasive cleaners, and harsh chemicals |
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!
Frequently Asked Questions
Is RAXTiFY vinyl easy to install?
RAXTiFY vinyl wraps are made in line with professional uses.Others such as high-gloss, metallic, or glitter series are stiffer than the traditional wraps because of surface coating technology.Although the flat panels can be easily installed by the hands of skilled DIY users, it is highly advised that professional installation be done in complex curves and high visibility areas.
Can I apply overlaminate on RAXTiFY vinyl?
Overlamination should be avoided.Other coating layers can have an influence on surface transparency, bonding and durability.The original surface finish of RAXTiFY vinyl is developed to be the last visual coating.
How should I maintain RAXTiFY vinyl wraps?
- Wash using pH-neutral car shampoo
- Use a soft microfiber cloth or touchless wash
- Pressure washers should remain under 2000 PSI
Cleanse up the contaminants e.g. bird droppings, sap of trees or fuel residues as soon as possible to avoid staining.
Can I use wax or polish on RAXTiFY vinyl?
Vinyl specific spray waxes or sealants are only used; these are mostly used in gloss and metallic finishes.Abrasive polishes, cutting compounds or solvent based chemicals are to be avoided.Any product should always be tested on a small and inconspicuous part of the skin before it can be applied.
How long does RAXTiFY vinyl wrap last?
Wrap lifespan depends on multiple factors, including:
- Film series and finish
- Installation quality
- Environmental exposure
- Maintenance habits
Although RAXTiFY films are designed to give non-textured finishes to the vehicle, the end result could depend on the painted state of the vehicle in the first place.The scratches, dents, rust, bubbles or orange peel that may be present before installation may be left and are not regarded as film defect.
Will removing RAXTiFY vinyl damage my paint?
RAXTiFY vinyl wraps should not harm factory paint when used on OEM paint that is in fine condition and removed without causing damage to the paint.
Does storage affect wrap lifespan?
Parking in interior parts or shaded parking areas mean a lot of less exposure to UV and environmental pressure.In case of an indoor storage, a breathable car cover will be recommended, as it will be helpful to maintain the quality of the finish and increase the wrap lifespan.