Gloss Diamond Pearl Azalea Pink Vinyl Wrap
- Sku: P08-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film is included only on full rolls (59ft) of gloss vinyls.
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
2. Products ordered separately may have slight color variations due to different color lots.
3. Use a bubble remover/defoamer on the surface before applying for best results.
4. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Diamond Pearl Azalea Pink Vinyl Wrap
Product Summary
Gloss Diamond Pearl Azalea Pink Vinyl Wrap is a saturated pink vinyl with small reflective pearls scattering throughout the surface. It is more vibrant than Light Pink, but it does not lean as warm or peachy as Peach Pink.
The gloss surface reflects the base colour in a clean way, whilst the diamond-pearl particles provide a few little points of light when viewing the film up close or in bright light. Azalea Pink is a pretty pink as viewed from a normal distance and does not sparkle as strongly as a glitter finish.
What Color is Azalea Pink?
Azalea Pink is on the more vibrant, and intense, side of the pink spectrum. It isn't baby pink or pastel pink, nor is it intended to be neon.
Colours are clearly pink in large areas. The surface seems brighter and the highlights are picked up when the exposure is greater under strong light. The shade is slightly darker in shaded areas as there is less light coming off the gloss surface.
It is a relatively neutral shade when compared to warmer pinks that trend toward peach or coral. This makes Azalea Pink an option when you want a stronger pink without moving toward very light pink or a redder pink.
How Does the Diamond Pearl Finish Look in Different Light?
Diamond-pearl effect is best seen up close. The surface is solid pink, but there are small reflective particles scattered throughout, creating a more granular texture and adding detail to the overall surface.
These particles are more visible under concentrated lighting or direct sunlight. The light doesn't change the wrap colour, but it does add more contrast to the pink base, gloss reflections and pearl highlights.
The sparkle is less noticeable and more of the base color is visible in softer lighting. This implies that the finish may appear somewhat clean from afar but reveals more details as you get close to it or when the direct light hits it.
This is not a color-shift wrap. Azalea Pink does not change between distinctly different colors as the viewing angle changes. The differences are caused by the brightness, reflection and visibility of the pearl particles.
Azalea Pink vs Other Pink Wrap Colors
A Light Pink will produce a more muted, light feel and veer more towards a pastel shade. Peach Pink opens up with a warmer aspect, adding peach and coral to the color. Azalea Pink remains more vivid, more vibrant without tending in the direction of those warmer colors.
The finish is also Diamond Pearl which distinguishes it from a simple gloss pink. The reflective particles bring more surface detail to the surface, especially when lit in direct light, but not as heavy or dramatic as more aggressive glittery finishes.
If you have to choose between two or more similar shades of pink, the best way to determine the difference in saturation and undertone is by looking at physical samples, under daylight.
Product Specifications
Gloss Diamond Pearl Azalea Pink is a PVC vinyl wrap for exterior color-change applications. The film features an air-release adhesive system to control air being trapped during the installation process and a PET liner that safeguards the adhesive surface prior to application.
- Color: Azalea Pink
- Finish: Gloss Diamond Pearl
- Material: High-grade polymeric calendered vinyl film
- Recommended Uses: Automotive
- Shipping Time: Standard shipping: 7-10 days; Faster shipping: 3-5 days
- Sizes Available: 5ft x 3ft, 5ft x 10ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft, 5ft x 69ft, 5ft x 75ft.
Azalea Pink Vinyl Wrap FAQ
Q1. Is Azalea Pink a pastel pink?
A: Azalea Pink is not a pastel or baby pink, but is more saturated and definitely stronger.
Q2. Does the diamond pearl finish change color?
A: The visible difference comes mainly from gloss reflection and pearl visibility rather than a major color change.
Q3. How noticeable is the pearl sparkle?
A: More noticeable at a short distance and in direct light. From farther away, the pink base predominates once again.
Q4. How is Azalea Pink different from Light Pink or Peach Pink?
A: Light Pink is lighter and more pastel, while Peach Pink leans warmer toward peach and coral. Azalea Pink is more saturated and stays closer to a straightforward pink.
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Vinyl Specifications
| Specification | Details |
|---|---|
| Product Type | Automotive Vinyl Wrap |
| Film Type | Polymeric calendered vinyl film |
| Designed Use | Full vehicle wraps, partial wraps, and exterior accents |
| Film Construction | Polymeric vinyl with air-release adhesive channels |
| Face Film Thickness | 3.7–4.1 mil (approx. 0.094–0.104 mm) |
| Adhesive Type | Solvent-based pressure-sensitive acrylic adhesive |
| Adhesive Thickness | 1.6 mil (approx. 0.041 mm) |
| Initial Tack | Low Initial Tack, High Holding Power |
| Air-Release Channels | Yes |
| Release Liner | PET |
| Top Protective Film | PET, where supplied with the applicable finish or roll configuration |
| Directional Film | Yes — maintain a consistent film direction across adjacent panels |
| Application Method | Dry application |
| Recommended Installation Temperature | 20°C–30°C (68°F–86°F) |
| Service Temperature Range | −45°C to +45°C (−49°F to 113°F) |
| Roll Width | 60 in / 5 ft / 1.52 m |
| Full Roll Length | 59 ft / 19.7 yd / 18 m |
| Approx. Full Roll Weight | 28.7 lb / 13 kg |
| Expected Outdoor Service Life | 2-3 years, depending on climate, UV exposure, installation, parking conditions, and maintenance |
| Expected Indoor / Sheltered Service Life | 2-3 years, depending on use and maintenance |
| Installation Difficulty | Easy to Intermediate; DIY-friendly |
Technical Performance Data
| Test Item | Typical Result |
|---|---|
| Elongation at Break — MD | Approx. 200% |
| Elongation at Break — CD | Approx. 190% |
| Tensile Strength | 22.7 N/10 mm |
| Dimensional Stability | Shrinkage less than 4%* |
| Surface Tension | Approx. 34 dynes/cm |
| Release Force | 0.12 N/25 mm, tested at 25°C and 50% RH |
| Initial Tack | 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength | 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power | 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998 |
| Aging Test 1 | 7 days at 65°C — no adhesive residue observed after removal with heat |
| Aging Test 2 | 10 days at 65°C — no adhesive residue observed after removal without heat |
Installation & Application
| Application Method | Dry application |
|---|---|
| Installation Temperature | 20°C–30°C (68°F–86°F) |
| Post-Heating | 95°C–110°C (203°F–230°F) |
| Curves & Recesses | Up to 120°C (248°F) |
| Directional Film | Yes — maintain consistent film direction across panels |
| Recommended Tools | Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer |
| Installation Notes | Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses. |
Care & Maintenance
| Washing | pH-neutral automotive shampoo; hand wash or touchless wash recommended |
|---|---|
| Pressure Washing | Below 2000 PSI; avoid spraying directly at exposed edges |
| Avoid | Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals |
| Contaminants | Remove bird droppings, tree sap, fuel residue, and insects promptly |
| Wax & Sealant | Use vinyl-safe products only |
| Parking | Indoor, garage, or shaded parking recommended |
Lifespan & Warranty
| Outdoor Service Life | 2-3 years |
|---|---|
| Indoor / Sheltered Use | 2-3 years |
| Warranty | 2-Year Limited Warranty for eligible material defects |
| Warranty Exclusions | Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects |
Storage & Shelf Life
| Shelf Life | Up to 2 years |
|---|---|
| Storage Temperature | 10°C–20°C (50°F–68°F) |
| Relative Humidity | Approx. 50% |
| Storage Conditions | Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects. For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!