Skip to product information

Gloss Jade Green Vinyl Wrap

  • Sku: G12-3M
$189.00 USD
 per 
Shipping calculated at checkout.
In stock!
Size: 5ft*10ft (Hood)

Air-Release Channel

PET Backing Liner

Low Initial Tack

Quality Warranty

NOTE:

1. Top Protective film is included only on full rolls (59ft) of gloss vinyls.

For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.

All matte/ satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.

59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut

2. Products ordered separately may have slight color variations due to different color lots.

3. Use a bubble remover/defoamer on the surface before applying for best results.

4. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.

View full details

Gloss Jade Green Vinyl Wrap

Description

Levitate the look of your ride with RAXTiFY Gloss Jade Green Vinyl Wrap, a pristinely conceived luxurious automotive solution that effortlessly mingles ageless elegance and unmatched durability — one exquisite attribute at a time. In this extravagant wrap, it goes above the humdrum and features a pearlescent, vivid green color similar to the coveted jade stone that inspired its design.

Our Gloss Jade Green Vinyl Wrap wraps your car, not only mesmerising glock with its workmanship proficiency and splashes colour. In the gentle caress of sunlight, as it glides over your car's curves, this shade heightens a visual appeal that transforms your ride into a rolling piece of art that exudes sophistication and assurance.

It's designed to change the way your car looks and protect from damage! This device is resistant to scratches, hard weather or daily wear and hence it ensures you a durable performance that will make your car look the same as if you wrap it. The vinyl we use protects your vehicle from rock chips, road debris, tar and more while you are out there on the open highway. The tough coating is resilient against tree sap, bird droppings and bug splatter while keeping your factory paint looking fresh.

We make sure your car stays glossy and scratch-free for decades. It also serves as a long-lasting protective shield which will help preserve the car's resale value, by repelling moisture and road salt so that corrosion or rust does not occur.

Our Gloss Jade Green wrap is made from multiple layers designed with accuracy and to perfection. The outermost layer which is called the protective film protects the underlying high-grade polymeric vinyl. Along the bottom is a pressure-sensitive acrylic adhesive that secures an industrial-strength bond to your vehicle. The third layer is a 130-micron plastic liner that protects the adhesive and helps it maintain its high tack throughout extended periods of use.

With this vinyl wrap in Gloss Jade Green, both professionals and DIY installers can experience its easy handling properties. With air release technology, it aids in a perfect bubble-free application which prevents creases from forming during installation. The wrap is also removable and repositionable so you can peel it off the carbon surface to make adjustments or just try again if times don't work out. It can stretch up to 30% for a perfectly contoured fit, whether your ride is curvaceous or boxy.

Considering the hassle of installing this wrap, keeping it in great condition is a workless process. You can clean it at home by washing it with mild car shampoo, a bucket of water and a microfiber towel. You don't need to spend money on pressure washers, or constantly going to carwashes every couple of months. Gloss Jade Green now offers a standard release force, initial tack and holding power which are all industry benchmarks for other films. When it is time to get rid of your wrap you will be able to remove the film with ease without having remaining sticky residues. Your car will be unveiled in its original crystal condition.

These flexible wraps come in rolls of varying lengths (10ft–59 feet) to suit any application, ensuring there is no unnecessary waste. The fine folks there will deliver the pristine vinyl to your doorstep in 10-12 business days wherever on earth you might be.

Video of Gloss Jade Green Vinyl Wrap

More Features:

  • High-quality and durable vinyl wrap
  • Equipped with air-release channels for bubble-free application
  • Easy to use: peel and stick
  • UV resistant, ensuring years of fade-free use
  • Durable, waterproof, and resistant to fading and wrinkling
  • Leaves no marks when removed
  • Eco-friendly and non-toxic
  • Suitable for car wraps, motorcycles, boats, bikes, and more

Gloss Jade Green Vinyl Specifications:

  • Color: Jade Green
  • Finish: Gloss
  • Recommended Uses: Automotive
  • Shipping Time: Standard shipping: 7-10 days; Faster shipping: 3-5 business days
  • Sizes Available: 5ft x 3ft, 5ft x 10ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft, 5ft x 69ft, 5ft x 75ft

    Structure

    Our wrap films consist of 4 layers designed to ensure exceptional performance:

    The first layer serves as a protective barrier for the underlying vinyl.

    Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.

    Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.

    Vinyl Specifications

    Specification Details
    Product Type Automotive Vinyl Wrap
    Film Type Polymeric calendered vinyl film
    Designed Use Full vehicle wraps, partial wraps, and exterior accents
    Film Construction Polymeric vinyl with air-release adhesive channels
    Face Film Thickness 3.7–4.1 mil (approx. 0.094–0.104 mm)
    Adhesive Type Solvent-based pressure-sensitive acrylic adhesive
    Adhesive Thickness 1.6 mil (approx. 0.041 mm)
    Initial Tack Low Initial Tack, High Holding Power
    Air-Release Channels Yes
    Release Liner PET
    Top Protective Film PET, where supplied with the applicable finish or roll configuration
    Directional Film Yes — maintain a consistent film direction across adjacent panels
    Application Method Dry application
    Recommended Installation Temperature 20°C–30°C (68°F–86°F)
    Service Temperature Range −45°C to +45°C (−49°F to 113°F)
    Roll Width 60 in / 5 ft / 1.52 m
    Full Roll Length 59 ft / 19.7 yd / 18 m
    Approx. Full Roll Weight 28.7 lb / 13 kg
    Expected Outdoor Service Life Approx. 2 years, depending on climate, UV exposure, installation, parking conditions, and maintenance
    Expected Indoor / Sheltered Service Life 2-3 years, depending on use and maintenance
    Installation Difficulty Easy to Intermediate; DIY-friendly

    Technical Performance Data

    Test Item Typical Result
    Elongation at Break — MD Approx. 200%
    Elongation at Break — CD Approx. 190%
    Tensile Strength 22.7 N/10 mm
    Dimensional Stability Shrinkage less than 4%*
    Surface Tension Approx. 34 dynes/cm
    Release Force 0.12 N/25 mm, tested at 25°C and 50% RH
    Initial Tack 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014
    Peel Strength 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998
    Holding Power 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998
    Aging Test 1 7 days at 65°C — no adhesive residue observed after removal with heat
    Aging Test 2 10 days at 65°C — no adhesive residue observed after removal without heat

    Installation & Application

    Application Method Dry application
    Installation Temperature 20°C–30°C (68°F–86°F)
    Post-Heating 95°C–110°C (203°F–230°F)
    Curves & Recesses Up to 120°C (248°F)
    Directional Film Yes — maintain consistent film direction across panels
    Recommended Tools Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer
    Installation Notes Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses.

    Care & Maintenance

    Washing pH-neutral automotive shampoo; hand wash or touchless wash recommended
    Pressure Washing Below 2000 PSI; avoid spraying directly at exposed edges
    Avoid Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals
    Contaminants Remove bird droppings, tree sap, fuel residue, and insects promptly
    Wax & Sealant Use vinyl-safe products only
    Parking Indoor, garage, or shaded parking recommended

    Lifespan & Warranty

    Outdoor Service Life 2-3 years
    Indoor / Sheltered Use 2-3 years
    Warranty 2-Year Limited Warranty for eligible material defects
    Warranty Exclusions Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects

    Storage & Shelf Life

    Shelf Life Up to 2 years
    Storage Temperature 10°C–20°C (50°F–68°F)
    Relative Humidity Approx. 50%
    Storage Conditions Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture

    Frequently Asked Questions

    Is RAXTiFY vinyl easy to install?

    RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.

    However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.

    Can I order a sample before buying a full roll?

    Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.

    Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.

    Does this vinyl wrap come with a warranty?

    Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.

    This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.

    Some specialty finishes, including chrome and 3D/5D/6D carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.

    For full details, please read our RAXTiFY Warranty Policy.

    How long does this vinyl wrap last?

    RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.

    Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.

    How do I care for this vinyl wrap?

    For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.

    Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.

    Can I remove this vinyl wrap later?

    Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.

    Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.

    Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.

    Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!