Gloss Metallic Black Red Car Wrap
- Sku: GM32-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
2-Year Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7–10 days (Free) | 5–7 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Film Material & Construction
- Film Type: Premium-grade polymeric calendered vinyl wrap
- Material Structure: Polymeric hybrid vinyl with integrated air-release channels
- Designed Use: Full vehicle wraps and smooth to moderately curved surfaces
- Directional Film: Yes (installation direction must be observed)
- Backing Liner: PET
Thickness
- Vinyl Film Thickness: approx. 0.13 mm
- Total Thickness (with release liner): approx. 0.28–0.30 mm
Adhesive System
Adhesive Type: Solvent-based acrylic adhesive
Adhesive Features:
- Pressure-sensitive
- Transparent appearance
- Designed for automotive exterior use
- Balanced initial tack and repositionability
Adhesive Layer Thickness: approx. 12 μm (dry)
Application & Installation Guidelines
Certain finishes (ultra-gloss, metallic, glitter series) may be firmer than standard vinyl due to surface coating structure. Professional installation is recommended
Recommended Application Temperature
- Installation Environment: +17°C to +25°C
- Service Temperature Range: −45°C to +45°C
Recommended Tools
- Squeegee with soft buffer
- Utility knife
- Masking tape
- Heat gun
- Magnets
- Gloves
- IR thermometer (strongly recommended for accurate post-heating)
Post-Heating Requirements (Critical)
Proper post-heating is essential to release internal film stress and ensure long-term adhesion.
- Flat Surfaces: 110°C
- Curves, Recesses & Overlaps: 130°C
Note: Failure to post-heat correctly may result in edge lifting or shrinkage over time.
Mechanical & Physical Properties (Typical Values)
Elongation at Break:
- MD: ~200%
- CD: ~190%
Tensile Strength:
- MD: ~29 N/mm²
- CD: ~25 N/mm²
Dimensional Stability: ≤ 2% (70°C / 10 min oven test)
Surface Tension: ~34 dynes/cm
Maintenance & Care
- Clean only with pH-neutral automotive shampoo
- Use soft microfiber cloth or touchless wash
- Pressure washing below 2000 PSI only
- Avoid brush-style car washes, abrasive tools, and solvent-based cleaners
- Remove bird droppings, sap, fuel residue, and contaminants promptly
- Vinyl-safe spray wax or sealant only
- Abrasive polish, cutting compounds, ceramic coatings, and overlamination are not recommended
Durability & Warranty
Service life varies by film series, installation quality, environment, and maintenance
Warranty (if applicable) covers material defects only
The following are not covered:
- Improper installation or insufficient post-heating
- Overstretching, overheating, or misuse
- Overlaminate or unapproved surface treatments
- Environmental damage, road debris, or accidents
- Surface imperfections originating from the vehicle’s original paint
Storage & Shelf Life
Indoor or shaded parking is strongly recommended
Shelf Life: Up to 3 years
Storage Conditions:
- Temperature: +10°C to +20°C
- Relative Humidity: approx. 50%
- Store in original packaging
- Keep away from direct sunlight, heat, dust, and moisture
Packaging Information
- Roll Width: 152 cm (60 inches)
- Roll Length: 18 m
- Approximate Roll Weight: 13 kg
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft


Gloss Metallic Black Red Car Wrap
Video of Gloss Metallic Black Red Car Wrap
Black Base with Metallic Red Highlights
Gloss Metallic Black Red Car Wrap has an eye catching combination of intense dark black and bright red metallic colors. The black to red wrap is of high quality, which gives it a sleek, glossy touch and contours the curves of your car, and will give it a long shelf life against scratches and minor abrasions. Its metallic finish gives it a high-end appearance that can be seen in any light, and it is a great option when it comes to those who want to have a high-end vehicle wrap as well as a strong one.
This finish is a glossy black surface with metallic red flakes in it unlike the normal car wrap which is in single-tone. At some angles, there will be an amazing red glitter that flows with the lines of the body that will make your car look like it has layers and is dynamic. It is soft when dim and bright when sunny - an ideal combination of mystery and power.
Striking Two-Tone Visual Effect
The wrap was black in a shiny gloss tones, but on closer inspection, vibrant rich metallic red can be observed through its texture. This two-color mood provides a car with a dynamic character changing with the environment and offering one of the ultimate presents of appearance.
Deep Gloss Black Foundation
The black base with its great depth also supports the sharp lines, body curves, and aggressive lines which contribute to a more refined look of the vehicle.
Red Metallic Glow Under Light
The red metallic particles embedded in it reflect both natural and artificial lights as a shifting scarlet light that varies as you move round the car
Premium Gloss Finish
The gloss texture enhances the shine and creates the mirror-like look with its polished texture that does not diminish the durability.
Material Quality & Protection
High-Grade Polymeric PVC Film
This metallic black red car wrap is made of automotive grade polymeric PVC and it has the ability to retain its shape without shrinkage as well as dynamic temperatures.
Resistant to UV, Water & Minor Scratches
This functional layer protects the top as well as avoids fading, secures your original paint and maintains the gloss finish to last many years.
Long-Lasting Durability (2 Years)
When well installed and serviced the wrap has long durability and can be used successfully.
Installation Experience
Air-Release Channels for Bubble-Free Application
The metallic red vinyl wrap film also has micro air-release grooves and thus can be easily fitted onto flat surfaces, curves and contours.
Stretchable & Flexible Material
Ideal for complex body shapes such as bumpers, fenders, and side mirrors.
DIY-Friendly & Clean Removal
The glue is very strong that can be used over a long period of time but can be taken off easily without leaving the paint damaged at the point of need to change the appearance.
Vehicle Compatibility
This wrap fits cars, syruv, truck, and even more sportbike. Whatever the type of vehicle, the black-red mixture fits perfectly with dissimilar shapes and body lines
-
Sedans & coupes
-
Sports cars & muscle cars
-
SUVs & trucks
-
Motorcycles & sportbikes
Its bi-color metal finish particularly adds to performance cars and dark-themed construction.
Easy Maintenance
The glossy all-time-easy comes clean. The dirt and dust can be washed easily leaving your car with a polish appearance at a minimum cost.
More Features:
-
Premium, long-lasting vinyl wrap
-
Suitable for cars, motorcycles, boats, bikes, and more
-
UV-resistant for fade-free longevity
-
Simple peel-and-stick application
-
No residue upon removal
-
Waterproof and resistant to fading and wrinkling
FAQ About Gloss Metallic Black Red Car Wrap
Q1. Will the red metallic accents be obvious on a cloudy day?
The red effect becomes softer in low-light but still visible. A stronger transition in color is exhibited in the metallic red-black wrap in sunlight.
Q2. Can I wax a metallic black-red gloss wrap?
Use only vinyl-safe spray wax. Do not use a traditional paste wax and ceramic finishes that have not been designed to be applied to the vinyl, they can dull the finish.
Q3. How do I clean and maintain a Gloss Metallic Black Red Wrap?
- Use pH-neutral car wash soap
- Avoid harsh chemicals and abrasive brushes
- Hand wash is preferred
- Apply vinyl-safe detail spray to keep the glossy black-red finish vibrant.
Q4. Does the gloss metallic red-black vinyl fade over time?
All vinyl did not last forever; a good metallic black red wrap is made of UV-resistant material. Do not spend a lot of time in the sun and bathe frequently to keep shiny.
Q5. Is this black-red metallic wrap easy to install for beginners?
It can be installed by amateurs, however, metallic gloss films are a bit harder than matte wraps. When you are new in wrapping, you need to use panels of less curves or may want to hire an expert.
Q6. How much does it cost to wrap a car in Gloss Metallic Black Red?
Prices depend on size of vehicles and means of installation:
- DIY material price: $500-$600a full-size roll.
- Professional installation: $1,800–$4,500+
Premium pigment which may be in the form of metallic black-to-red wrap among other special finishes makes the cost a bit higher.
Q7. Does the black-to-red metallic wrap really show two colors?
Get your Metallic Black to Red Wrap Now!
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of top-tier 130um plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Item Specifications
| RAXTiFY VINYL | Specifications |
|---|---|
| Technology | High-grade Polymeric Calendared Vinyl Film with Air-Release Channels |
| Top Protective Liner | PET |
| Thickness (Face only) | 3.7mil-4.1mil |
| Thickness (Adhesive) | 1.6 mil (Removable Adhesive with air-release channels) |
| Glue | Solvent based adhesive, (Low-Medium Tack - Easy to reposition) |
| Release Liner | PET/Plastic |
| Width (Standard) | 5ft/ 60in/ 1.52m |
| Length (Standard) | 59ft/ 65yard/ 18m |
| Indoor Lifespan | 3 years when following rules of application and use |
| Outdoor Lifespan | 2 years when following rules of application and use (Except Chrome Wraps) |
Wrap Testing
| RAXTiFY VINYL | Testing Result |
|---|---|
| Dimensional Stability | Shrinkage less than 4% |
| Breaking Strength | 22.7 N/10mm |
| Release Force (N/25mm) | 0.13 (25℃ and 50%) |
| Initial Tack (g/25mm) | 1360 (26℃ and 64%, GB31125-2014) |
| Peel Strength (N/25mm) | 7.02 (25℃and 42%, GB/T2792-1998) |
| Holding Power (h) | 75.09 (25℃ and 50%, GB/T4851-1998) |
| Chemical Resistance | Resists Most Mild Acids, Mild Alkalis, and Salt |
| Aging Testing | No adhesive residue with heat under 65°C after 7 days |
| Aging Test 2 | No adhesive residue without heat under 65°C after 10 days |
| Storing Period | 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry place |
Application
| RAXTiFY VINYL | Application Advices |
|---|---|
| Recommended Tools | Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater |
| Application | Standard methods for calendared films. No overstretching and overheating and Post heating is necessary. |
| Post-heating Temperature | 110°C flat surfaces, 130°C curves, and overlaps (Except Chrome Wraps) |
| Recommended Installation Area Temperature | 70 F - 80 F (24 C - 26.5 C) |
| Directional | All vinyl wraps are recommended to be installed directionally |
| Application Method | Dry Application (Except PPF) |
| Aftercare | PH neutral, Avoid wax or solvents |
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!
Frequently Asked Questions
Is RAXTiFY vinyl easy to install?
RAXTiFY vinyl wraps are made in line with professional uses.Others such as high-gloss, metallic, or glitter series are stiffer than the traditional wraps because of surface coating technology.Although the flat panels can be easily installed by the hands of skilled DIY users, it is highly advised that professional installation be done in complex curves and high visibility areas.
Can I apply overlaminate on RAXTiFY vinyl?
Overlamination should be avoided.Other coating layers can have an influence on surface transparency, bonding and durability.The original surface finish of RAXTiFY vinyl is developed to be the last visual coating.
How should I maintain RAXTiFY vinyl wraps?
- Wash using pH-neutral car shampoo
- Use a soft microfiber cloth or touchless wash
- Pressure washers should remain under 2000 PSI
Cleanse up the contaminants e.g. bird droppings, sap of trees or fuel residues as soon as possible to avoid staining.
Can I use wax or polish on RAXTiFY vinyl?
Vinyl specific spray waxes or sealants are only used; these are mostly used in gloss and metallic finishes.Abrasive polishes, cutting compounds or solvent based chemicals are to be avoided.Any product should always be tested on a small and inconspicuous part of the skin before it can be applied.
How long does RAXTiFY vinyl wrap last?
Wrap lifespan depends on multiple factors, including:
- Film series and finish
- Installation quality
- Environmental exposure
- Maintenance habits
Although RAXTiFY films are designed to give non-textured finishes to the vehicle, the end result could depend on the painted state of the vehicle in the first place.The scratches, dents, rust, bubbles or orange peel that may be present before installation may be left and are not regarded as film defect.
Will removing RAXTiFY vinyl damage my paint?
RAXTiFY vinyl wraps should not harm factory paint when used on OEM paint that is in fine condition and removed without causing damage to the paint.
Does storage affect wrap lifespan?
Parking in interior parts or shaded parking areas mean a lot of less exposure to UV and environmental pressure.In case of an indoor storage, a breathable car cover will be recommended, as it will be helpful to maintain the quality of the finish and increase the wrap lifespan.

