Gloss Metallic Forest Green Car Wrap
- Sku: GM38-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7-10 days (Free) | 3-5 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Film Material & Construction
- Film Type: Premium-grade polymeric calendered vinyl wrap
- Material Structure: Polymeric hybrid vinyl with integrated air-release channels
- Designed Use: Full vehicle wraps and smooth to moderately curved surfaces
- Directional Film: Yes (installation direction must be observed)
- Backing Liner: PET
Thickness
- Vinyl Film Thickness: 3.7–4.1 mil
Adhesive System
Adhesive Type: Solvent-based acrylic adhesive
Adhesive Features:
- Pressure-sensitive
- Transparent appearance
- Designed for automotive exterior use
- Balanced initial tack and repositionability
Adhesive Layer Thickness: 1.6 mil
Application & Installation Guidelines
Certain finishes (ultra-gloss, metallic, glitter series) may be firmer than standard vinyl due to surface coating structure. Professional installation is recommended
Recommended Application Temperature
- Installation Environment: 20°C–30°C (68°F–86°F)
- Service Temperature Range: −45°C to +45°C
Recommended Tools
- Squeegee with soft buffer
- Utility knife
- Masking tape
- Heat gun
- Magnets
- Gloves
- IR thermometer (strongly recommended for accurate post-heating)
Post-Heating Requirements (Critical)
Proper post-heating is essential to release internal film stress and ensure long-term adhesion.
- Flat Surfaces: 95°C–110°C
- Curves, Recesses & Overlaps: up to 120°C
Note: Failure to post-heat correctly may result in edge lifting or shrinkage over time.
Mechanical & Physical Properties (Typical Values)
Elongation at Break:
- MD: ~200%
- CD: ~190%
Tensile Strength: 22.7 N/10mm
Dimensional Stability: Shrinkage less than 4%
Surface Tension: ~34 dynes/cm
Maintenance & Care
- Clean only with pH-neutral automotive shampoo
- Use soft microfiber cloth or touchless wash
- Pressure washing below 2000 PSI only
- Avoid brush-style car washes, abrasive tools, and solvent-based cleaners
- Remove bird droppings, sap, fuel residue, and contaminants promptly
- Vinyl-safe spray wax or sealant only
- Abrasive polish, cutting compounds, ceramic coatings, and overlamination are not recommended
Durability & Warranty
Service life varies by film series, installation quality, environment, and maintenance
Warranty (if applicable) covers material defects only
The following are not covered:
- Improper installation or insufficient post-heating
- Overstretching, overheating, or misuse
- Incompatible overlaminates, coatings, or surface treatments
- Environmental damage, road debris, or accidents
- Surface imperfections originating from the vehicle’s original paint
Storage & Shelf Life
Indoor or shaded parking is strongly recommended
Shelf Life: Up to 3 years
Storage Conditions:
- Temperature: +10°C to +20°C
- Relative Humidity: approx. 50%
- Store in original packaging
- Keep away from direct sunlight, heat, dust, and moisture
Packaging Information
- Roll Width: 152 cm (60 inches)
- Roll Length: 18 m
- Approximate Roll Weight: 13 kg
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Metallic Forest Green Car Wrap
Gloss Metallic Forest Green Car Wrap will have a forest green appearance with a general metallic shine on your car. The metallic forest green wrap creates the ideal blend between the calmness of nature and the vengeance the technology, a result, which is multi-layered. The green wrap has a natural richness and a modern metallic finish, and produces a deep and layered look.
Video
Color & Finish Overview
Deep Forest Green with Metallic Depth
The saturation of the forest green is mixed with the slightest gilding tone, forming a unique phenomenon of light and shadow. In the sunlight, the surface turns not as deep and calm green but brighter emerald accents. The change in colour is subtle and makes the vehicle look dynamic and moving.
The spirit of nature that is projected by this green wrap is luxurious in your car. It is a classic color that would not be too old on your car but one that would help your car to shine yet not excessively. This wrap is only that when you love to wear unique wraps which are non flaunt and that too.
Elegant Light Shift Under Sunlight
Gloss Metallic Forest Green color changes to emerald with a changing light. The light shift gives a sophisticated natural appearance that improves on the presence of the vehicle.
Features Gloss Metallic Forest Green Car Wrap
Strong Material Durability & Weather Resistance
Gloss Metallic Forest Green is designed to drive in every day and extreme outdoor conditions. The polymeric durable material ensures your car is not affected by the UV rays and road debris, acid rain and changes in temperature. Drive on the hot climates or during rainy seasons, the film does not crack or peel off to change its structure or colour. It stands straight to any kind of environment and yet ensures your car looks fresh and polished.
Premium Gloss + Metallic Texture for a Rich Finish
This shade combines a high-quality and multi-dimensional finish with a fine metallic texture with a shade of elegant forest-green. The glass surface is an augmentation to the curves of sports cars and luxury SUVs, whereas the metallic flakes provide the visual depth in varying light conditions. It is a favorite color among high-end brands like Aston Martin, Porsche, and Tesla in particular since it brings out the body lines in a delicate but impressive manner.
Reliable Paint Protection for Daily Driving
In addition to improving the looks, this green wrap serves as a layer of protection to the paint on your vehicle that is made in the factory. It protects against UV ray, street dirt and minor scratches. Small swirl marks are not as visible with the ability of the metallic surface to reflect. The original paint is intact under it to aid in keeping your car in the long-term value.
Easy Installation with Air-Release Technology
This metallic greencar wrap will be suitable to its DIY users, as well as professional installers. It has advanced air- Release channels that enable easy escape of air minimizing bubbles and errors in installations. A clean, paint-like finish is something that can be attained by even the beginners with the help of patience and technique.
Why Gloss Metallic Forest Green Looks Good on Many Vehicles？
Enhances Luxury Sedans and Premium SUVs
Gloss Metallic Forest Green is refined with high-end and mature appearance on luxury sedans and high-end SUVs. The dark green color is adding an impression of a class and sophistication just like a high-end palette in Europe. Such brands as BMW, Mercedes-Benz, Lexus and Range Rover receive a high status without being too obnoxious and thus the car creates a more exclusive and refined look.
Complements Sporty Body Lines on Performance Cars
The metallic layer highlights main body features during the sunshine, and the glossy finish creates intense reflections on the sharp edges. Such automobiles as the Ford Mustang, Dodge Charger, Chevrolet Camaro and Nissan Z series appear to be more dynamic and aggressive in this colour, owing to its emerald-like lustre at varying angles of sight.
Gloss Metallic Forest Green Wrap Specifications：
- Durability: Lasts 2-3 years, weather-resistant.
- Applications: Cars, trucks, boats, laptops, phones, etc.
- Stretchability: Highly stretchable, easy to remove.
- Protection: UV-resistant, waterproof, and corrosion-resistant.
- Paint Defense: Protects paint from scratches and wear.
- Full Coverage: Seamless application across entire vehicle.
- Flexibility: Adapts to any curve or shape.
- Longevity: Durable, scratch-resistant, and fade-resistant.
- Color Clarity: Special coating for vibrant, natural color.
- Corrosion Shield: Resists acid rain, harmful gases.
- No Residue: Removable with no sticky residue.
- Eco-Friendly: Safe for paint, humans, and the environment.
- High-Quality Material: Premium wrap with superior performance.
- Air-Release Channels: Ensures bubble-free installation.
- Color: Forest Green
- Finish: Gloss Metallic
- Shipping Time: Standard shipping: 7-12 business days; Faster shipping: 3-5 business days.
How Much Forest Green Wrap Do You Need?
Motorcycles: 5ft × 10ft
Convertible / Coupes: 5ft × 49ft
Sedans: 5ft × 59ft
SUVs / Trucks: 5ft × 75ft
Partial Wrap:
Front Bumper: 5ft × 10ft
Trunk: 5ft × 10ft
Hood: 5ft × 10ft
Door: 5ft × 5ft
Side Skirt: 5ft × 10ft
Roof: 5ft × 10ft
Rear Bumper: 5ft × 10ft
Fender: 5ft × 5ft
Why Choose Raxtify Forest Green for Your Vehicle？
When selecting RAXTiFY, one will select a brand that is based on quality, consistency and reliability. All vinyl wraps rolls are made by high-standards of materials to make them easy to install, to perform steadily, and to make their finish last long when all other cheap films fail.
Premium Polymeric PVC for Superior Results
RAXTiFY employs the polymeric PVC in high grade which has been designed to give stability and durability. In contrast to inexpensive monomeric wraps which tighten, distort or acquire an orangy-peel texture, RAXTiFY remains smooth and refined with a metallic clarity. The film remains flat, lively and true to its original form even in the presence of a lot of sunshine or a changing temperature.
Strong, Clean-Release Adhesive — Without the Drawbacks of Cheap Films
Our glue system provides us with a strong bond yet one which can be easily removed without leaving any trace. Low budget film tend to use glue which is harsh and low quality and leaves residue or damages factory paint. Under RAXTiFY, you will have a reliable adhesion to drive on a daily basis and the option of adding or changing the wrap any time without strains, messes, or repaint.
Consistent Color Accuracy & Long-Lasting Depth
Each production batches are strictly color matched to give consistency in color, gloss and metallic intensity. Whereas inexpensive green wraps fade away or turn to dull colors, the coating of RAXTiFY is UV-resistant and its original quality Forest Green is still rich. It is the car that is retaining its luxurious metallic brunch, regardless of your first month or your second year on the road.
Reliable Dimensional Stability — No Lifting, No Shrink Lines
RAXTiFY films have been made to be in situ. The material is resistant to edge lifting, seam separation and shrink lines- which are extremely prevalent with the cheaper versions of vinyls. The wrap is tight and is uniform to the curves, edges, and panels once it is installed, maintaining a professional look with time.
Engineered for DIY Users and Professionals Alike
RAXTiFY films act as expected whether at home wrapping your car or at a professional installer. The wrap is the thinnest, is heat responsive, and does not distort over complicated shapes. Novices love the fact that it is forgiving, and professionals like its stability when making high precision installations.
Premium Quality Without the Premium Markup
FAQs about Gloss Metallic Forest Green Car Wrap:
Q1. What does a Gloss Metallic Forest Green Car Wrap look like?
A gloss forest green wrap has a rich deep tone of emerald colour and the metallic flakes make it shiny and three dimensional. It appears high quality and shiny and wealthier than an ordinary green wrap.
Q2. How long does a metallic forest green vinyl wrap last?Gloos Metallic Forest green vinyl car wrap will typically cost:
-
DIY Material Cost: $500–$800
-
Professional Installation: $1,800–$4,000 depending on vehicle size and shop location.
-
Sports cars (Mustang, Dodge Charger)
-
Luxury sedans (BMW, Mercedes, Lexus)
-
SUVs (Jeep, Toyota, Range Rover)
The color sets out body lines and has a sophisticated and high-end touch.
Q9: What is Your Shipping Timeframe?
A: We prepare orders in 1-2 days. Normal delivery (free) is delivered within 5-10 business days and quick delivery is delivered within 3-5 business days.
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Item Specifications
| RAXTiFY VINYL | Specifications |
|---|---|
| Technology | High-grade polymeric calendered vinyl film with air-release channels |
| Top Protective Liner | PET |
| Thickness (Face only) | 3.7–4.1 mil, face film only |
| Thickness (Adhesive) | 1.6 mil removable pressure-sensitive adhesive with air-release channels |
| Glue | Solvent-based adhesive, low-to-medium tack for easier repositioning |
| Release Liner | PET/Plastic |
| Width (Standard) | 5ft / 60in 1.52m |
| Length (Standard) | 19.7yd / 59ft / 18m |
| Indoor Lifespan | 3 years depending on use and maintenance |
| Outdoor Lifespan | 2 years depending on climate, installation, and maintenance (Except Chrome Wraps) |
Wrap Testing
| RAXTiFY VINYL | Testing Result |
|---|---|
| Dimensional Stability | Shrinkage less than 4% |
| Tensile Strength | 22.7 N/10mm |
| Release Force (N/25mm) | 0.13 N/25mm, tested at 25°C and 50% RH |
| Initial Tack (g/25mm) | 1360 g/25mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength (N/25mm) | 7.02 N/25mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power (h) | 75.09 (25℃ and 50%, GB/T4851-1998) |
| Chemical Resistance | Resistant to mild acids, mild alkalis, and salt. Avoid strong solvents and harsh cleaners. |
| Aging Testing | No adhesive residue after 7 days of heat exposure under 65°C |
| Aging Test 2 | No adhesive residue after 10 days under standard aging conditions |
| Storing Period | Up to 3 years when stored in the original packaging at +10°C to +20°C, 50% RH, away from direct sunlight, in a clean and dry environment |
Application
| RAXTiFY VINYL | Application Advices |
|---|---|
| Recommended Tools | Squeegee with felt edge, microfiber buffer, sharp knife, masking tape, magnets, gloves, heat gun, infrared thermometer |
| Application | Apply using standard dry-wrap techniques for calendered vinyl films. Avoid overstretching and overheating. Post-heating is required on edges, curves, recessed areas, and overlaps |
| Post-heating Temperature | 95°C–110°C for most areas and up to 120°C for curves and overlaps (Except Chrome Wraps） |
| Recommended Installation Area Temperature | 20°C–30°C (68°F–86°F) |
| Directional | All vinyl wraps are recommended to be installed directionally |
| Application Method | Dry Application （Except PPF) |
| Aftercare | Clean with pH-neutral car wash soap and a soft microfiber cloth. Avoid strong solvents, abrasive cleaners, and harsh chemicals |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!