Gloss Miami Blue Vinyl Wrap
- Sku: G30-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film is included only on full rolls (59ft) of gloss vinyls.
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
2. Products ordered separately may have slight color variations due to different color lots.
3. Use a bubble remover/defoamer on the surface before applying for best results.
4. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Miami Blue Vinyl Wrap
Video
Gloss Miami Blue Vinyl Wrap on Vehicles
Gloss Miami Blue Vinyl Wrap on Chevrolet Camaro
Miami Blue appears slightly deeper on this Chevrolet Camaro in shaded light, while the gloss surface keeps the blue looking smooth and saturated.
Gloss Miami Blue Vinyl Wrap on Charger
Miami Blue gives this Dodge Charger a brightblue appearance, with the color staying saturated across the large body panels under soft outdoor light.
Gloss Miami Blue Vinyl Wrap on Toyota Corolla
Under nighttime artificial lighting, Miami Blue appears especially bright on this Toyota Corolla, with stronger highlights and reflections across the rear and side panels.
Gloss Miami Blue Vinyl Wrap on BMW M3
Miami Blue looks vivid and clean on this BMW M3, while natural daylight brings out its light cyan-blue tone and glossy surface reflections.
Gloss Miami Blue Vinyl Wrap on Audi S4
Miami Blue appears bright and slightly turquoise on this Audi S4, with the gloss finish showing clear reflections across the hood and side panels.
Description of Gloss Miami Blue Vinyl Wrap
Miami Blue Gloss Vinyl Wrap-- A bright shade in a luxurious high gloss. Wrapped in a thrilling Miami Blue showcasing the dynamic spirit of tropical urban habitats and sunny beach days. This bright lapis-like blue catches your attention, and under direct sunlight the high-gloss effect makes it seem to glow from within, which gives an appearance of greater depth—all desirable attributes for any exterior automotive finish. Its modern and shiny appearance is for those wishing to stand out from the crowd in a bright colour.
Imagine this gloss Miami Blue on a muscle car such as the Dodge Challenger, Pontiac Firebird, or Chevrolet Corvette. Applied to these iconic cars, the facelifted blue hue infuses with shades of cool elegance and a vibrant sheen for an aggressive stance that pops from every daring crease in bright shiny metal.
The vehicle wrap is crafted from high-quality polymeric vinyl, which ensures both excellent appearance and exceptional durability for many years to come. It also comes with air-release channels that makes this wrap easier to apply, giving both DIYers and professionals alike a flawless finish without any bubbles. The flexibility of the vinyl allows for a tight wrap on complex bends and corners, while the strong adhesive backing will confirm it stays in place—relatively forever.
Using tough boxes, you can get up a roll of turf in, and it will arrive at your door without any creases, hopefully or damage. They range from one meter squared, well, the smallest size, which is three-point; however, some point eight meters square up into 18-meter squares that they've got available at themoment
Not only does this wrap bring your car's image to the next level, but it provides essential protection for those high-impact areas. This gives unmatched UV protection, combined with extra resistance to minor abrasions and wear from the elements such as road debris, bird droppings, or tree sap, ensuring your car's finish is kept in flawless condition.
Cleaning the gloss Miami Blue Wrap is simple. They can only be hand-washed using mild car shampoo and kept shiny with regular dusting of a microfibre doth. Use medium-pressure washes to save from the shine of the wrap for a more extended term.
Gloss Miami Blue Wrap: Buy yours today and have it in 3-5 days. Our partnerships with wrap shops nationwide make it easy to find professional installation near you.
Not only does this wrap provide a high-impact finish with its bold and brilliant transformation, it is also cost-effective when compared to most conventional paint jobs. No matter where you drive, Gloss Miami Blue will guarantee your car never goes unnoticed.
Features and Specifications:
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Vinyl Specifications
| Specification | Details |
|---|---|
| Product Type | Automotive Vinyl Wrap |
| Film Type | Polymeric calendered vinyl film |
| Designed Use | Full vehicle wraps, partial wraps, and exterior accents |
| Film Construction | Polymeric vinyl with air-release adhesive channels |
| Face Film Thickness | 3.7–4.1 mil (approx. 0.094–0.104 mm) |
| Adhesive Type | Solvent-based pressure-sensitive acrylic adhesive |
| Adhesive Thickness | 1.6 mil (approx. 0.041 mm) |
| Initial Tack | Low Initial Tack, High Holding Power |
| Air-Release Channels | Yes |
| Release Liner | PET |
| Top Protective Film | PET, where supplied with the applicable finish or roll configuration |
| Directional Film | Yes — maintain a consistent film direction across adjacent panels |
| Application Method | Dry application |
| Recommended Installation Temperature | 20°C–30°C (68°F–86°F) |
| Service Temperature Range | −45°C to +45°C (−49°F to 113°F) |
| Roll Width | 60 in / 5 ft / 1.52 m |
| Full Roll Length | 59 ft / 19.7 yd / 18 m |
| Approx. Full Roll Weight | 28.7 lb / 13 kg |
| Expected Outdoor Service Life | Approx. 2 years, depending on climate, UV exposure, installation, parking conditions, and maintenance |
| Expected Indoor / Sheltered Service Life | 2-3 years, depending on use and maintenance |
| Installation Difficulty | Easy to Intermediate; DIY-friendly |
Technical Performance Data
| Test Item | Typical Result |
|---|---|
| Elongation at Break — MD | Approx. 200% |
| Elongation at Break — CD | Approx. 190% |
| Tensile Strength | 22.7 N/10 mm |
| Dimensional Stability | Shrinkage less than 4%* |
| Surface Tension | Approx. 34 dynes/cm |
| Release Force | 0.12 N/25 mm, tested at 25°C and 50% RH |
| Initial Tack | 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength | 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power | 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998 |
| Aging Test 1 | 7 days at 65°C — no adhesive residue observed after removal with heat |
| Aging Test 2 | 10 days at 65°C — no adhesive residue observed after removal without heat |
Installation & Application
| Application Method | Dry application |
|---|---|
| Installation Temperature | 20°C–30°C (68°F–86°F) |
| Post-Heating | 95°C–110°C (203°F–230°F) |
| Curves & Recesses | Up to 120°C (248°F) |
| Directional Film | Yes — maintain consistent film direction across panels |
| Recommended Tools | Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer |
| Installation Notes | Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses. |
Care & Maintenance
| Washing | pH-neutral automotive shampoo; hand wash or touchless wash recommended |
|---|---|
| Pressure Washing | Below 2000 PSI; avoid spraying directly at exposed edges |
| Avoid | Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals |
| Contaminants | Remove bird droppings, tree sap, fuel residue, and insects promptly |
| Wax & Sealant | Use vinyl-safe products only |
| Parking | Indoor, garage, or shaded parking recommended |
Lifespan & Warranty
| Outdoor Service Life | 2-3 years |
|---|---|
| Indoor / Sheltered Use | 2-3 years |
| Warranty | 2-Year Limited Warranty for eligible material defects |
| Warranty Exclusions | Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects |
Storage & Shelf Life
| Shelf Life | Up to 2 years |
|---|---|
| Storage Temperature | 10°C–20°C (50°F–68°F) |
| Relative Humidity | Approx. 50% |
| Storage Conditions | Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and 3D/5D/6D carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!