- Sku: DPPF30
Ultra Gloss Slate Gray Paint Protection Film
1.Top Protective film: Included only on full rolls (59ft) of color ppf.
2. Shipping Time: 7-10 days (Free) | 3-5 days (Express).
3. For smaller, pre-cut pieces of color ppf, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the color ppf.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Have a question?
Ultra Gloss Slate Gray Paint Protection Film
RAXTiFY Color PPF
Structure
Why RAXTiFY Color PPF?
Ultra Gloss Slate Gray Paint Protection Film is a TPU-based colored protection film designed to combine appearance and everyday paint defense. Its cool slate-gray finish features restrained blue undertones and a smooth reflective surface. The film helps reduce exposure to chips, minor abrasions, road debris, and environmental wear while giving the vehicle a polished, contemporary color upgrade for daily use.
Product Description
Ultra Gloss Slate Gray Paint Protection Film is a colored automotive protection film made from Thermoplastic Polyurethane. It is designed to provide a cool gray exterior finish while adding a sacrificial protective layer over the vehicle’s original paint.
The Slate Gray color contains subtle blue undertones. Its appearance may range from a neutral medium gray to a cooler blue-gray depending on sunlight, indoor lighting, viewing angle, and nearby reflections. The ultra-gloss surface increases clarity and creates a smooth, reflective finish across properly prepared panels.
TPU offers the flexibility needed to conform around common vehicle curves and body contours when installed correctly. Once applied, the film helps protect painted surfaces from small rock chips, light scratches, road debris, insect contamination, and normal environmental exposure.
Color PPF should be installed using the recommended wet-application process by an experienced installer. Proper paint preparation, slip-solution control, stretching technique, edge management, and curing conditions can all affect the final result. A physical sample is recommended because digital images may not reproduce the exact color accurately.
Ultra Gloss Slate Gray Paint Protection Film Specs:
- Material: Thermoplastic Polyurethane (TPU)
- Colour: Slate Gray
- Finish: Ultra Gloss
- Standard Width: 5ft/60in/1.52m
Item Specifications
| Colored PPF | Specifications |
|---|---|
| Technology | Dynamic TPU (Thermoplastic Polyurethane) |
| Total Thickness | 7.64mil |
| Top Coat Thickness | 0.31 mil |
| TPU Layer Thickness | 4.82 mil |
| Color & Base Layer Thickness | 1.5 mil |
| Adhesive Thickness | 1.02 mil |
| Release Liner | PET |
| Top Coat | Ultra Gloss/Matte & Self-Healing |
| Adhesive Type | Removable & Reposition Acrylic |
| Width (Standard) | 5ft/ 60in/ 1.52m |
| Length (Standard) | 59ft/18m |
| Application | Wet Apply/ Dry Apply |
Techniocal Details
| Test | Data | Test Conditions |
|---|---|---|
| Hydrophobic | 103 ° | Angle contact |
| Self-Healing | 70 °C | Heat Gun |
| Anti-Permeation | / | Permanent Marker |
| Anti-Yellowing ΔΕ | ≤2 | Q-UV, 1000hrs |
| Satin Resistance | No Marks | Motor Waste oil |
| Anti-Chipping | / | SAE J400 |
| Tensile strength | ≥20(mpa) | GB/T 1040.1 |
| Peel Adhesion | ≥16(N/25mm) | GB/T 2792 |
| Hardness | ≥90 | ISO0868/ASTM D-2240 |
| Elongation at Break | ≥340 | GB/T1040 |
| Coating Elongation at Break | ≥85 | GB/T1040 |
| Chemical Resistance | No Marks | (Detergent) Naturally dried |
| Mud Resistance | No Marks | 70 °/1h Wash &. Heat gun |
| Acid Resistance | No abnormalities | 10% hydrochloric acid solution |
| Alkali Resistance (168H) | No abnormalities | 20% sodium hydroxide solution |
| Application Temperature | +20°C to +30°C | / |
| Durability | 3-5years | / |
| Application Method | Wet Application | / |
| Gloss | ≥ 90% | 60° |