Gloss Metallic Mamba Green Car Wrap
- Sku: GM47-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7-10 days (Free) | 3-5 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Film Material & Construction
- Film Type: Premium-grade polymeric calendered vinyl wrap
- Material Structure: Polymeric hybrid vinyl with integrated air-release channels
- Designed Use: Full vehicle wraps and smooth to moderately curved surfaces
- Directional Film: Yes (installation direction must be observed)
- Backing Liner: PET
Thickness
- Vinyl Film Thickness: 3.7–4.1 mil
Adhesive System
Adhesive Type: Solvent-based acrylic adhesive
Adhesive Features:
- Pressure-sensitive
- Transparent appearance
- Designed for automotive exterior use
- Balanced initial tack and repositionability
Adhesive Layer Thickness: approx. 12 μm (dry)
Application & Installation Guidelines
Certain finishes (ultra-gloss, metallic, glitter series) may be firmer than standard vinyl due to surface coating structure. Professional installation is recommended
Recommended Application Temperature
- Installation Environment: 20°C–30°C (68°F–86°F)
- Service Temperature Range: −45°C to +45°C
Recommended Tools
- Squeegee with soft buffer
- Utility knife
- Masking tape
- Heat gun
- Magnets
- Gloves
- IR thermometer (strongly recommended for accurate post-heating)
Post-Heating Requirements (Critical)
Proper post-heating is essential to release internal film stress and ensure long-term adhesion.
- Flat Surfaces: 95°C–110°C
- Curves, Recesses & Overlaps: up to 120°C
Note: Failure to post-heat correctly may result in edge lifting or shrinkage over time.
Mechanical & Physical Properties (Typical Values)
Elongation at Break:
- MD: ~200%
- CD: ~190%
Tensile Strength: 22.7 N/10mm
Dimensional Stability: ≤ 2% (70°C / 10 min oven test)
Surface Tension: ~34 dynes/cm
Maintenance & Care
- Clean only with pH-neutral automotive shampoo
- Use soft microfiber cloth or touchless wash
- Pressure washing below 2000 PSI only
- Avoid brush-style car washes, abrasive tools, and solvent-based cleaners
- Remove bird droppings, sap, fuel residue, and contaminants promptly
- Vinyl-safe spray wax or sealant only
- Abrasive polish, cutting compounds, ceramic coatings, and overlamination are not recommended
Durability & Warranty
Service life varies by film series, installation quality, environment, and maintenance
Warranty (if applicable) covers material defects only
The following are not covered:
- Improper installation or insufficient post-heating
- Overstretching, overheating, or misuse
- Incompatible overlaminates, coatings, or surface treatments
- Environmental damage, road debris, or accidents
- Surface imperfections originating from the vehicle’s original paint
Storage & Shelf Life
Indoor or shaded parking is strongly recommended
Shelf Life: Up to 3 years
Storage Conditions:
- Temperature: +10°C to +20°C
- Relative Humidity: approx. 50%
- Store in original packaging
- Keep away from direct sunlight, heat, dust, and moisture
Packaging Information
- Roll Width: 152 cm (60 inches)
- Roll Length: 18 m
- Approximate Roll Weight: 13 kg
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Metallic Mamba Green Car Wrap
Video
Gloss Metallic Mamba Green on Vehicles
Gloss Metallic Mamba Green on Lexus
Gloss Metallic Mamba Green on Honda
Gloss Metallic Mamba Green Vinyl Wrap on Subaru WRX
Gloss Metallic Mamba Green gives this Subaru WRX a deep green finish with bright metallic highlights under direct sunlight. The wide bodywork, polished wheels, black trim, and low stance make the color look especially aggressive while the reflective surface keeps the build clean and show-ready.
Gloss Metallic Mamba Green Vinyl Wrap on Subaru
Mamba Green Vinyl Wrap on Mustang on BMW
Gloss Metallic Mamba Green Vinyl Wrap on Acura Wagon
Mamba Green Vinyl Wrap on Mustang
Why Choose the Gloss Metallic Mamba Green Car Wrap？
Gloss Metallic Mamba Green would be an exclusive and great option if you want your car to have a more aggressive look. It is a rich color with high energy combining natural green colourings and a clean metallic niche that provides your vehicle with a familiar and appealing look. Whether you are attempting to stand out while on the road or want a look that is uniquely yours, this color provides everything you could ask for.
Deep Metallic Shimmer
This shade has fine metallic flakes which form a high-end, premium finish like the high end performance paints. In the sun, this green shines alive spectrum, which is at one time radiant emerald and in another, deep forest. The metallic shimmer finish is coated and textured that adds depth of field to the film, the ever changing luminosity that surrounds the film as one moves around it. The effect is to make your car look livelier and this vivid green wrap is extremely visually energetic and therefore immediately catches the eye.
Perfect Fit for Performance Cars
This is the Gloss Metallic Mamba Green Car Wrap which works especially well on those vehicles which would want to have a dominating road presence. This shade will enhance the lines of the car, no matter what kind of car you drive, it can be Mustang, Camaro, Charger, or BMW, and a variety of aggressive SUVs, it will make the silhouette look sharper and more defined.
A Venom-Inspired Green That Stands Out Day and Night
The color has a strong venomous attitude in the daytime, which is why it suits the performance cars, raised off-road vehicles, and tuner-type of construction well. At night with the street lights, the metallic flake produces a clear glow that gives your vehicle a clear signature that cannot be confused with any other car.
DIY-Friendly Vinyl with Flexible
The Gloss Metallic Mamba Green vinyl would be user-friendly to both DIYers and professional installers. The movie is characterized by great flexibility to enable it to roll unhindranced along the deep curves, bumpers, mirrors and complicated shapes with ease without distortion. The channels of air-release can be used to get rid of bubbles and installation is more clean and quicker.
Enhanced Depth and Metallic Clarity
Mamba Green is hugely deeper and clearer compared to regular solid green films because of its multi-layered metallic composition. The flakes that are embedded reflect the light on all angles and produce a more pronounced reflective highlight and surface movement.
More Features:
- Build Defense: Defends against exterior scratches and wears spray defence for each fender
- Full Coverage: Seamless application across entire vehicle.
- Flexibility: Adapts to any curve or shape.
- Longevity: Durable, scratch-resistant, and fade-resistant.
- Color Clarity: Special coating for vibrant, natural color.
- Corrosion Shield: Resists acid rain, harmful gases.
- No Residue: Removable with no sticky residue.
- Eco-Friendly: Safe for paint, humans, and the environment
Gloss Metallic Mamba Green Wrap Specifications：
- Lifespan: 2-3 years, resistant to the elements.
- The uses: for cars, trucks boats, laptops, phones....
- Stretchable: Stretchy & Easy Remove
-
Protective: UV-Proof, Waterproof & Rust Proof
- High-Quality Material: Premium wrap with superior performance.
- Air-Release Channels: Ensures bubble-free installation.
- Color: Mamba Green
- Finish: Gloss Metallic
- Shipping Time: Standard shipping: 7-12 business days; Faster shipping: 3-5 business days.
How much Mamba Green Car Wrap do I require?
A: Fully wrap
- Motorcycles: 5ft*10ft
- Convertible/ Coupes: 5ft*49ft
- Sedans: 5ft*59ft
- SUVs/ Trucks: 5ft*75ft
B: Partial wrap
- Front Bumper: 5ft*10ft
- Trunk: 5ft*10ft
- Hood: 5ft*10ft
- Door: 5ft*5ft
- Side Skirt: 5ft*10ft
- Roof: 5ft*10ft
- Rear Bumper: 5ft*10ft
- Fender: 5ft*5ft.
FAQs about Gloss Metallic Mamba Green Car Wrap:
Q1. Does Gloss Metallic Mamba Green fade over time?
Metallic green wraps can be UV resistant and are of high quality, giving them a warranty of 2 years outdoors when maintained. The lifespan can be further prolonged by washing regularly and not staying long under the blazing sun.
Q2. Is Gloss Metallic Mamba Green difficult to install?
The film material has air-release channels which simplify the installation process and prevent bubbles. Nonetheless, novices still might want to have the services of professional installers to have the perfect work, particularly on curvy body lines.
Q3. How much does it cost to wrap a car in Mamba Green?
The average cost of professional installation is $2500-5000+, based on the size of the vehicle, wrap difficulty, and location. The cost of DIY installation is much lower - all you need to do is to buy the material.
Q4. Is the Gloss Metallic Mamba Green available with different finishes?
The given color is mostly recognized by its shiny metallic look. To have a different appearance, there are brands that have the same colors in satin metallic or color shift finishes.
Q5. Can Gloss Metallic Mamba Green be used on motorcycles or interior panels?
Such type of vinyl wrap is applicable to motorcycles, interior trims, dashboards, badges, and even the accessories. It is portable and suitable to large size and small size surfaces.
Q6. Where do we ship from?
A: Our factory is located in China. It will enable us to save on costs and give you the best prices without compromising quality. We produce our products in the best industry standards to ensure that you purchase our products without doubt.
Q7. What is our Shipping Timeframe?
A: We prepare orders in 1-2 days. The normal delivery (free) of products is provided within 5-10 business days whereas the expedited shipping is provided within 3-5 business days.
Get Your Metallic Mamba Green Vinyl Now!
Related Resources:
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of top-tier 130um plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Item Specifications
| RAXTiFY VINYL | Specifications |
|---|---|
| Technology | High-grade polymeric calendered vinyl film with air-release channels |
| Top Protective Liner | PET |
| Thickness (Face only) | 3.7–4.1 mil, face film only |
| Thickness (Adhesive) | 1.6 mil removable pressure-sensitive adhesive with air-release channels |
| Glue | Solvent-based adhesive, low-to-medium tack for easier repositioning |
| Release Liner | PET/Plastic |
| Width (Standard) | 5ft / 60in 1.52m |
| Length (Standard) | 19.7yd / 59ft / 18m |
| Indoor Lifespan | 3 years depending on use and maintenance |
| Outdoor Lifespan | 2 years depending on climate, installation, and maintenance (Except Chrome Wraps) |
Wrap Testing
| RAXTiFY VINYL | Testing Result |
|---|---|
| Dimensional Stability | Shrinkage less than 4% |
| Tensile Strength | 22.7 N/10mm |
| Release Force (N/25mm) | 0.13 N/25mm, tested at 25°C and 50% RH |
| Initial Tack (g/25mm) | 1360 g/25mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength (N/25mm) | 7.02 N/25mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power (h) | 75.09 (25℃ and 50%, GB/T4851-1998) |
| Chemical Resistance | Resistant to mild acids, mild alkalis, and salt. Avoid strong solvents and harsh cleaners. |
| Aging Testing | No adhesive residue after 7 days of heat exposure under 65°C |
| Aging Test 2 | No adhesive residue after 10 days under standard aging conditions |
| Storing Period | Up to 3 years when stored in the original packaging at +10°C to +20°C, 50% RH, away from direct sunlight, in a clean and dry environment |
Application
| RAXTiFY VINYL | Application Advices |
|---|---|
| Recommended Tools | Squeegee with felt edge, microfiber buffer, sharp knife, masking tape, magnets, gloves, heat gun, infrared thermometer |
| Application | Apply using standard dry-wrap techniques for calendered vinyl films. Avoid overstretching and overheating. Post-heating is required on edges, curves, recessed areas, and overlaps |
| Post-heating Temperature | 95°C–110°C for most areas and up to 120°C for curves and overlaps (Except Chrome Wraps） |
| Recommended Installation Area Temperature | 20°C–30°C (68°F–86°F) |
| Directional | All vinyl wraps are recommended to be installed directionally |
| Application Method | Dry Application （Except PPF) |
| Aftercare | Clean with pH-neutral car wash soap and a soft microfiber cloth. Avoid strong solvents, abrasive cleaners, and harsh chemicals |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!