Gloss Metallic Raspberry Red Vinyl Wrap
- Sku: GM22-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film: Included only on full rolls (59ft) of gloss vinyls.
2. Shipping Time: 7-10 days (Free) | 3-5 days (Express).
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ Satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
4. Products ordered separately may have slight color variations due to different color lots.
5. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
6. We prioritize sending films with PET backing liners. If unavailable, paper backing liners will be provided. Use a bubble remover/defoamer on the surface before applying for best results.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Metallic Raspberry Red Vinyl Wrap
Gloss Metallic Raspberry Red Vinyl Wrap gives your vehicle a vivid berry-red finish with fine metallic reflections that look brighter under direct sunlight and deeper in shaded areas. This color works especially well on MINI, Mazda, Volkswagen Golf, Subaru BRZ, and compact sport builds because it adds energy without looking like a standard bright red.
Video
Gloss Metallic Raspberry Red Vinyl Wrap On Vehicles
Gloss Metallic Raspberry Red Vinyl Wrap on Honda Accord
Gloss Metallic Raspberry Red Vinyl Wrap On Honda Civic
Raspberry Red Vinyl Wrap On Honda
Raspberry Red Vinyl Wrap on Nissan
Raspberry Red Vinyl Wrap on Infiniti
Raspberry Red Vinyl Wrap Hyundai
Raspberry Red Vinyl Wrap On Benz
Volvo Evo8 Raspberry Red Vinyl Wrap
Dodge Charger Gloss Metallic Raspberry Red Vinyl Wrap
Gloss Metallic Raspberry Red Vinyl Wrap on BMW
Hyundai Genesis Raspberry Red Vinyl Wrap
Why Choose Gloss Metallic Raspberry Red Vinyl Wrap?
Make your car turn into a work of art and the RAXTiFY Gloss Metallic Raspberry Red Vinyl Wrap with its bright cherry-red look and the glossy sheen of a metallic halo over the wrap. This is a very bright red that will make your car look bright immediately you are on the road and give your original paint long life.
Rust and Corrosion Protection
Your vehicle paintwork can be gradually destroyed by road salt, moisture and debris. The maroon red wrap provides a protective barrier, which inhibits rust, corrosion, and oxidation to keep your paint intact, and keep long-term resale value.
Cost-Effective Options
An entire professional wrap of a couple or sedan costs about $2000-$3500 depending on work and the size of the vehicle. To achieve the same dramatic red look without spending fortune, partial wraps, e.g. the hood, roof, trunk, bumpers or mirrors will offer the same dramatic red appearance at a fraction of the cost.
Size Options
This Raspberry Red vinyl line is sold in various sizes between 3ft and 75ft and it can be said as simple to buy what you actually need when it comes to complete wraps or small accent projects.
Easy Installation and Customizability
The pressure-sensitive acrylic adhesive has its own air-release channels to make the application of the adhesive to look bubble-free. This gloss metallic wrap has a stretchability of 30 percent making it smooth along curves, edges, and complex shapes. The film comes off with a residue of not even a single occurring when time to change arrives.
Durability and Protection
It is not just a wrap about style. It prevents against your car:
- Scratches
- UV damage
- Fading and dulling
- Pesticide residues (bugs, sap, droppings of birds)
It is glossy and shiny and lasts 2-3 years with proper care and installation.
DIY-Friendly Installation
The Gloss Metallic Raspberry Red Wrap is an easy to apply surface that can be used by professionals and amateur DIYer. Use conventional installation procedures and you will have a home clean professional finish.
Feature of Gloss Metallic Raspberry Red Vinyl Wrap
UV Ray Protection
This red wrap keeps away harmful UV radiation that leads to fading and loss of paint and also helps your car to have a fresh and shiny look.
Unmatched Aesthetic Appeal
The dramatic depth and shine is provided by the metallic cherry-red finish. It is also rich in color and therefore fits well with drivers who would wish to stand out and make a statement.
Versatile Customization Options
Use it for:
- Full-body wraps
- Mirrors, trims, spoilers, hood stripes, etc.
- Custom color-blocking
-
Multi-tone designs
High-Durability and Longevity
This calendered polymeric film is high grade and does not scratch, fade or wear out in the environment; hence protecting your car throughout the year.
More Features:
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Vinyl Specifications
| Specification | Details |
|---|---|
| Product Type | Automotive Vinyl Wrap |
| Film Type | Polymeric calendered vinyl film |
| Designed Use | Full vehicle wraps, partial wraps, and exterior accents |
| Film Construction | Polymeric vinyl with air-release adhesive channels |
| Face Film Thickness | 3.7–4.1 mil (approx. 0.094–0.104 mm) |
| Adhesive Type | Solvent-based pressure-sensitive acrylic adhesive |
| Adhesive Thickness | 1.6 mil (approx. 0.041 mm) |
| Initial Tack | Low Initial Tack, High Holding Power |
| Air-Release Channels | Yes |
| Release Liner | PET |
| Top Protective Film | PET, where supplied with the applicable finish or roll configuration |
| Directional Film | Yes — maintain a consistent film direction across adjacent panels |
| Application Method | Dry application |
| Recommended Installation Temperature | 20°C–30°C (68°F–86°F) |
| Service Temperature Range | −45°C to +45°C (−49°F to 113°F) |
| Roll Width | 60 in / 5 ft / 1.52 m |
| Full Roll Length | 59 ft / 19.7 yd / 18 m |
| Approx. Full Roll Weight | 28.7 lb / 13 kg |
| Expected Outdoor Service Life | Approx. 2 years, depending on climate, UV exposure, installation, parking conditions, and maintenance |
| Expected Indoor / Sheltered Service Life | 2-3 years, depending on use and maintenance |
| Installation Difficulty | Easy to Intermediate; DIY-friendly |
Technical Performance Data
| Test Item | Typical Result |
|---|---|
| Elongation at Break — MD | Approx. 200% |
| Elongation at Break — CD | Approx. 190% |
| Tensile Strength | 22.7 N/10 mm |
| Dimensional Stability | Shrinkage less than 4%* |
| Surface Tension | Approx. 34 dynes/cm |
| Release Force | 0.12 N/25 mm, tested at 25°C and 50% RH |
| Initial Tack | 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength | 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power | 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998 |
| Aging Test 1 | 7 days at 65°C — no adhesive residue observed after removal with heat |
| Aging Test 2 | 10 days at 65°C — no adhesive residue observed after removal without heat |
Installation & Application
| Application Method | Dry application |
|---|---|
| Installation Temperature | 20°C–30°C (68°F–86°F) |
| Post-Heating | 95°C–110°C (203°F–230°F) |
| Curves & Recesses | Up to 120°C (248°F) |
| Directional Film | Yes — maintain consistent film direction across panels |
| Recommended Tools | Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer |
| Installation Notes | Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses. |
Care & Maintenance
| Washing | pH-neutral automotive shampoo; hand wash or touchless wash recommended |
|---|---|
| Pressure Washing | Below 2000 PSI; avoid spraying directly at exposed edges |
| Avoid | Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals |
| Contaminants | Remove bird droppings, tree sap, fuel residue, and insects promptly |
| Wax & Sealant | Use vinyl-safe products only |
| Parking | Indoor, garage, or shaded parking recommended |
Lifespan & Warranty
| Outdoor Service Life | Approx. 2 years |
|---|---|
| Indoor / Sheltered Use | Up to 3 years |
| Warranty | 2-Year Limited Warranty for eligible material defects |
| Warranty Exclusions | Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects |
Storage & Shelf Life
| Shelf Life | Up to 2 years |
|---|---|
| Storage Temperature | 10°C–20°C (50°F–68°F) |
| Relative Humidity | Approx. 50% |
| Storage Conditions | Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!