Color Shift Pearl Blue Gold Vinyl Wrap
- Sku: CS05-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film is included only on full rolls (59ft) of gloss vinyls.
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
2. Products ordered separately may have slight color variations due to different color lots.
3. Use a bubble remover/defoamer on the surface before applying for best results.
4. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Color Shift Pearl Blue Gold Vinyl Wrap
Product Overview
Color Shift Pearl Blue Gold Vinyl Wrap is a light pearl blue base with a warm gold shift that changes as the viewing angle and reflected light changes. The gold is more angle-dependent. The gold also becomes easier to see around the front fender, bumper corners, lower body line and more. It is not a 50/50 ratio of blue/gold. The color dominant in the images presented here is blue, with gold being a kind of warm highlight that moves from place to place on the body.
Video
How Does Pearl Blue Gold Look in Different Light?
The larger panels will have a light blue tint and a silvery pearl effect in bright outdoor lighting. Warmer gold tones are more prominent in areas that are curved as well as on edges of panels rather than all over the side of the car.
The same contrast is seen in a different manner when the light source is strong indoors. Flatter areas of the doors remain relatively cool, whereas the rear portion of the fenders, the bumper edges and lower contours reflect warmer tones.
The blue may also look darker from other perspectives, so this picture should not be used as a true representation of the color at all times.
To the extent that you are concerned with the quantity of gold in your build, consider ordering a sample of it and examining it during daylight and in the shade and with indoor lighting.
Color Shift Pearl Blue Gold on a Honda
This Honda Accord sedan has a soft icy blue base color that shifts to a lighter, slightly warmer hue as the light changes across the hood and side panels, producing a hint of pearl.
Color Shift Pearl Blue Gold on a Dodge Charger
The colour is relatively consistent on the wide door panels and is predominantly pearl blue. The curve around the front fender and lower side profile creates more warmth and makes the gold more easily visible.
Where Is the Gold Shift Most Visible?
The gold side of the finish is usually easier to spot as the body is changing direction. The fenders, bumper corners, quarter panels, rocker areas and distinct body lines reflect light at various angles, creating a better separation of the warmer tone from the pearl blue base.
The blue side will be more uniform on broad, relatively flat surfaces like the middle of a door.The color shift will therefore look different on the vehicles with the curves and sculpted fenders than on cars with large, flat body panels.
Installation Notes
Pearl Blue Gold is a colour shift directional film. Ensure that the film orientation is consistent on neighbouring panels to ensure that the colour change runs the same direction around the car.
Air-release channels can help minimise trapped air when installing, but won't guarantee a bubble free finish. Recesses, curves, bumpers and mirrors still require controlled heat and stretch.
Do not overstretch the film, especially between neighbouring panels. Uneven stretching can alter the way that light reflects off the pearl and cause the pearl and color-shift effect to look different in some areas than others.
Who Is Pearl Blue Gold Best For?
Pearl Blue Gold is most appropriate for those who are looking for a wrap that will shift shades, but looks mostly light blue.
It works best for those who prefer a pearl body color and movement through curvy body lines but don't want a dark or highly aggressive 2 color shift.
It's not the best option if you are looking for a vehicle that's always gold or you are hoping the blue and gold will look as vibrant from every angle.
With this finish, a sample is especially helpful. The color-shift vinyl may appear different whenever exposed to different lighting conditions such as sunlight, shade, indoor lights, camera settings, screens and vehicle shapes.
Care and Service Life
Use a pH neutral auto shampoo and soft microfiber cloth/mitt. Hand washing or a touchless wash is preferred. When pressure washing, do not exceed 2000 PSI and do not spray directly on exposed edges or seams.
More Features
- Mesmerizing color shift effect that transitions between shades of blue and gold
- Glossy finish for a luxurious and distinctive appearance
- High-grade polymeric vinyl for exceptional durability
- Protects your vehicle's paint from minor scratches and UV damage
- User-friendly air release technology for easy and bubble-free installation
- Available in different sizes for versatile application
Color Shift Pearl Blue Gold Vinyl Specifications:
- Color: Pearl Blue Gold
- Finish: Color Shift
- Material: High-grade polymeric calendered vinyl film
- Recommended Uses: Automotive
- Shipping Time: Standard shipping: 7-10 days; Faster shipping: 3-5 business days
- Sizes Available: 5ft x 10ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft, 5ft x 69ft, 5ft x 75ft
Things You Should Know
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Vinyl Specifications
| Specification | Details |
|---|---|
| Product Type | Automotive Vinyl Wrap |
| Film Type | Polymeric calendered vinyl film |
| Designed Use | Full vehicle wraps, partial wraps, and exterior accents |
| Film Construction | Polymeric vinyl with air-release adhesive channels |
| Face Film Thickness | 3.7–4.1 mil (approx. 0.094–0.104 mm) |
| Adhesive Type | Solvent-based pressure-sensitive acrylic adhesive |
| Adhesive Thickness | 1.6 mil (approx. 0.041 mm) |
| Initial Tack | Low Initial Tack, High Holding Power |
| Air-Release Channels | Yes |
| Release Liner | PET |
| Top Protective Film | PET, where supplied with the applicable finish or roll configuration |
| Directional Film | Yes — maintain a consistent film direction across adjacent panels |
| Application Method | Dry application |
| Recommended Installation Temperature | 20°C–30°C (68°F–86°F) |
| Service Temperature Range | −45°C to +45°C (−49°F to 113°F) |
| Roll Width | 60 in / 5 ft / 1.52 m |
| Full Roll Length | 59 ft / 19.7 yd / 18 m |
| Approx. Full Roll Weight | 28.7 lb / 13 kg |
| Expected Outdoor Service Life | Approx. 2 years, depending on climate, UV exposure, installation, parking conditions, and maintenance |
| Expected Indoor / Sheltered Service Life | 2-3 years, depending on use and maintenance |
| Installation Difficulty | Easy to Intermediate; DIY-friendly |
Technical Performance Data
| Test Item | Typical Result |
|---|---|
| Elongation at Break — MD | Approx. 200% |
| Elongation at Break — CD | Approx. 190% |
| Tensile Strength | 22.7 N/10 mm |
| Dimensional Stability | Shrinkage less than 4%* |
| Surface Tension | Approx. 34 dynes/cm |
| Release Force | 0.12 N/25 mm, tested at 25°C and 50% RH |
| Initial Tack | 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength | 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power | 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998 |
| Aging Test 1 | 7 days at 65°C — no adhesive residue observed after removal with heat |
| Aging Test 2 | 10 days at 65°C — no adhesive residue observed after removal without heat |
Installation & Application
| Application Method | Dry application |
|---|---|
| Installation Temperature | 20°C–30°C (68°F–86°F) |
| Post-Heating | 95°C–110°C (203°F–230°F) |
| Curves & Recesses | Up to 120°C (248°F) |
| Directional Film | Yes — maintain consistent film direction across panels |
| Recommended Tools | Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer |
| Installation Notes | Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses. |
Care & Maintenance
| Washing | pH-neutral automotive shampoo; hand wash or touchless wash recommended |
|---|---|
| Pressure Washing | Below 2000 PSI; avoid spraying directly at exposed edges |
| Avoid | Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals |
| Contaminants | Remove bird droppings, tree sap, fuel residue, and insects promptly |
| Wax & Sealant | Use vinyl-safe products only |
| Parking | Indoor, garage, or shaded parking recommended |
Lifespan & Warranty
| Outdoor Service Life | 2-3 years |
|---|---|
| Indoor / Sheltered Use | 2-3 years |
| Warranty | 2-Year Limited Warranty for eligible material defects |
| Warranty Exclusions | Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects |
Storage & Shelf Life
| Shelf Life | Up to 2 years |
|---|---|
| Storage Temperature | 10°C–20°C (50°F–68°F) |
| Relative Humidity | Approx. 50% |
| Storage Conditions | Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and 3D/5D/6D carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!