Gloss Metallic Agate Green Car Wrap
- Sku: GM37-3M
Air-Release Channel
PET Backing Liner
Low Initial Tack
Quality Warranty
1. Top Protective film is included only on full rolls (59ft) of gloss vinyls.
For smaller, pre-cut pieces of glossy vinyl, the protective film is removed before shipping to ensure a smooth surface without air bubbles or creases. This does not affect the quality of the vinyl.
All matte/ satin vinyl wraps do not have a protective film, as their surface is naturally resistant to minor scratches and does not require additional protection.
59ft = full roll
69ft = full roll + 10ft pre-cut
75ft = full roll + 16ft pre-cut
2. Products ordered separately may have slight color variations due to different color lots.
3. Use a bubble remover/defoamer on the surface before applying for best results.
4. CAUTION! The images, colors, and finishes on the screen are approximate. For accuracy, refer to the color book or samples.
Size Chart
Motorcycles: 5ft * 16ft
Mini/ Small Cars: 5ft * 49 ft
Convertible: 5ft * 59 ft
Coupe: 5ft * 59 ft
Sedan: 5ft * 59 ft
Hatchback: 5ft * 59 ft
Sports Car: 5ft * 59 ft
Station Wagon: 5ft * 69 ft
Sport-utility Vehicle (SUV) : 5ft * 69 ft
Minivan: 5ft * 80 ft
Pickup Truck: 5ft * 92 ft
Gloss Metallic Agate Green Car Wrap
Product Overview
Gloss Metallic Agate Green Car Wrap gives your vehicle a rich gemstone-inspired green finish with fine metallic reflections that appear deeper and more luxurious under changing light conditions. Unlike brighter racing greens, agate green delivers a more mature and understated look, making it especially popular on Range Rovers, Porsche Cayennes, Jaguars, and executive sedans. This wrap is ideal if you want an elegant color that still feels distinctive without drawing excessive attention.
Videos
Gloss Metallic Agate Green Vinyl Wrap on Vehicles
Gloss Metallic Agate Green on Infiniti G37
Gloss Metallic Agate Green on Infiniti Q50
Gloss Metallic Agate Green on Infiniti
Gloss Metallic Agate Green on BMW
Gloss Metallic Agate Green on Toyota
Gloss Metallic Agate Green on Jeep
Gloss Metallic Agate Green on Charger
Gloss Metallic Agate Green on Nissan 370z
Gloss Metallic Agate Green Vinyl Wrap on Toyota Camry
Gloss Metallic Agate Green Vinyl Wrap on Subaru
Gloss Metallic Agate Green Vinyl Wrap on Mustang
Gloss Metallic Agate Green Vinyl Wrap on Lexus
Gloss Metallic Agate Green Honda Accord
VW Gloss Metallic Agate Green Wrap
Agate Green Car Wrap on Chevrolet
Gloss Metallic Agate Green on Mitsubishi
Gloss Metallic Agate Green Vinyl Wrap on Honda Civic
Gloss Metallic Agate Green on Nissan 350z
Deep Green with a Metallic Edge
Gloss Metallic Agate Green Car Wrap combines a rich forest-green base with minute metallic particles that shine in the natural light and provide your car with a clean, high-end, and undeniable high premium appearance.
This metallic vinyl wrap is unique due to its slight depth, as well as clarity and sharpness of the gloss on Gloss Metallic Agate Green. The metallic particles are coolly reflective under sunlight. The green is made more sophisticated, in the shade turning upscale and darker.
Agate Green is more sophisticated than the more luminous greens, whereas it is more transparent and vigorous than the more gloomy midnight shades. It is a great mix, one that is bold enough to be noticed, yet at the same time, has enough sophistication to fit any kind of vehicle.
Why Choose Gloss Metallic Agate Green？
Color & Finish
This is an exceptionally active sparkling, glossy wrap, unlike your standard finish which shimmers to life-capturing light off every exposure or angle at rest or on the go. This brings out a cool metallic sheen that not only makes your car look fantastic at all angles but also complements well with the rest.
Works Great on Luxury & Performance Cars
While it is a great match for expensive vehicles, in particular luxury and performance cars such as the Tesla Model S or BMW M Series. This means the richly applied Gloss Metallic Agate Green finish not only enhances the sharp profiles of these stunning models but also brings a more upscale and contemporary vibe to it. After each turn you travel your car establishes itself as both a transportation method and a creative artistic product that produces elegant power vibrancy.
Low-Maintenance Gloss Finish
This green car wrap has an effortless-to-clean glossy surface which keeps your vehicle appearance excellent but also safeguards it from dust and dirt. A quick car washing routine will return the wrap to perfect condition thus making this product ideal for those who want low-maintenance vehicle appearance.
Pricing Guide
For a standard size vehicle, Full Wrap Gloss Metallic Agate Green would be $500 to $600. Specialty models (SUVs, trucks) may cost more to wrap whereas partial wraps such as the roof or hood tend to be cheaper and are sometimes less than $69.
- Full wrap (sedan): $500–$600
-
Full wrap (SUV/truck): $750+
-
Partial wraps: Starting at $69 for mirrors, roof, or hood
Choosing a roll from RAXTiFY lets you save significantly compared to paying full shop prices.
Easy Removal Without Paint Damage
In case you feel like changing the look of your car, this Gloss Metallic Agate Green Car Wrap is easily removable leaving no sticky sticker left behind or damaging to the factory paint as compared to any other. The green vinyl wrap allows you to constantly modify your car's appearance and try different styles because it protects the original vehicle paint.
Features:
Our Gloss Metallic Agate Green Car Wrap asks that you experience the great things in life. It is a colour that means a new beginning, growth, and vigor of nature. Have a fresh new beginning for your car with this wonderful shade.
Rich Gloss Metallic Finish
Our gloss metallic agate green car wrap makes an awe-inspiring spectacle. The dark green of our metallic finish gives off an especially handsome effect that retains its charm wherever it goes. It is a smart choice for those who want to stand out on the road and let others know you are doing things differently.
Premium Quality and Durability:
This premium material green vinyl wrap comes with both quality and durability because of the thoughtful production process. Your vehicle withstands environmental assault year after year because this wrap maintains its appealing appearance.
Air-Release Channels for Bubble-Free Results
The application process provides an easy procedure which lets any novice apply vinyl wraps to achieve perfect precise vehicle alignments. Its appearance can be easily personalized in exactly the way you want without requiring much time.
Protective and Enhancing
The car wrap delivers both aesthetic appeal along with protecting the factory paint underneath. The wrap serves to defend against stone chips and scratches as well as heat from the sun and flying debris from the road. The installation elevates your automobile above mere appearance benefits.
Seamless Transition
A quick simple removal of the gloss metallic agate green vehicle wrap from your car allows access to the original paint without any damage while retaining its total integrity. You can switch to an entirely new appearance by following this process.
Stylish Versatility
The Gloss Metallic Agate Green Car Wrap improves your car's looks as well as being a statement of taste and creativity. Be infused with this fresh energy, get out on the road and every outing will be new.
More Features
- High-quality and durable vinyl wrap
- Equipped with air-release channels for bubble-free application
- Easy to use: peel and stick
- UV resistant, ensuring years of fade-free use
- Durable, waterproof, and resistant to fading and wrinkling
- Leaves no marks when removed
- Eco-friendly and non-toxic
- Suitable for car wraps, motorcycles, boats, bikes, and more
Specifications:
- Color: Agate Green
- Finish: Gloss Metallic
- Material: High-grade polymetric calendered vinyl film
- Thickness: 3.5mil–4.1mil
- Adhesive: With air-release channel
- Lifespan: 2-3 years (with proper installation and maintenance)
- Recommended Uses: Automotive
- Shipping Time: Standard shipping: 7-12 days; Faster shipping: 3-5 days
- Sizes Available: 5ft x 3ft, 5ft x 10ft, 5ft x 16ft, 5ft x 33ft, 5ft x 49ft, 5ft x 59ft, 5ft x 69ft, 5ft x 75ft
Why Buy Gloss Metallic Agate Green from RAXTiFY
You can buy Gloss Metallic Agate Green Car Wrap at RAXTiFY. Our vinyl is of premium quality, just tell us your car's make and model, choose the right roll length and we will send it to your home in 7 to 12 workdays.
FAQ about Gloss Metallic Agate Green Car Wrap
Q1. What does a Gloss Metallic Agate Green wrap look like in real life?
A gloss agate green wrap has a dark green background with metallic degrees which change slightly in sunlight. It is also more colorful and dimensional compared to the average green vinyl making your car look like it has a high-based, gemstone handle.
Q2. Is Gloss Agate Green vinyl wrap hard to install?
Majority of the metallic agate green vinyl films such as those in RAXTiFY contain air-release channels and removable adhesive. It can be installed by DIY installers, but it is better to employ a professional to guarantee that the number of seams will be reduced, and the glossy finish will be perfect.
Q3. How long does a metallic agate green car wrap last?
A good agate green car wrapping film is expected to last 2 years in the outside, provided it is not exposed to sun and it is properly maintained. Vehicles that are kept in the garage and systematically washed off can have the life span extended to about 6 years.
Q4. Does the Gloss Metallic Agate Green wrap fade easily?
Not when you opt to have a premium gloss metallic green wrap. Contemporary movies also have UV-resistant coats that delay the fading process. Gloss might fade away due to extreme heat or prolonged exposure to the sun, however, the color does not fade away provided it is taken proper care of.
Q5. Is Gloss Metallic Agate Green suitable for any car model?
This is the green metallic wrap that is widely used on sedans, SUVs, sports cars and even trucks. It is especially well suited with black accents, chrome deletes and smoked lights.
Q6. How do I maintain a Gloss Agate Green vinyl wrap?
Vinyl-safe sealant should be used after every 2-3 months to maintain the metallic gloss appearance freshness.
- Hand-wash only
- Use pH-neutral car shampoo
- Avoid strong chemicals, tunnel washes, or wax with abrasives
Q7. Is Gloss Metallic Agate Green better than a metallic green paint job?
Paint is permanent and more expensive. Vinyl gives you flexibility. Vinyl offers:
- Lower cost
- Faster installation
- Reversible color
- Better protection
- No long-term commitment
Q8. Will the Gloss Metallic Agate Green wrap look different on curved body panels?
The light is reflected at various angles by the metallic flakes and this makes the fenders, doors and bumpers look sculptured. That is why agate green vinyl wrap is among the favorite wraps among car enthusiasts.
Q9. Can I ceramic coat a metallic agate green wrap?
It enhances gloss, gives the metallic green shade hydrophobic protection and makes the shade always remain vivid.
Things You Should Know:
- How Much Does It Cost To Wrap A Car?
- How Much Vinyl Do You Need To Wrap Your Car?
- How to Vinyl Wrap A Car?
- How To Care For Your Vinyl Wraps?
- Shop The Best Colors For Your Car
Structure
Our wrap films consist of 4 layers designed to ensure exceptional performance:
The first layer serves as a protective barrier for the underlying vinyl.
Directly beneath, you'll find high-grade polymeric vinyl fortified with pressure-sensitive acrylic adhesive.
Finally, a layer of 130um release plastic liner adds an extra level of quality to our wrap films. This plastic liner ensures a smoother, super glossy, and lustrous finish.
Vinyl Specifications
| Specification | Details |
|---|---|
| Product Type | Automotive Vinyl Wrap |
| Film Type | Polymeric calendered vinyl film |
| Designed Use | Full vehicle wraps, partial wraps, and exterior accents |
| Film Construction | Polymeric vinyl with air-release adhesive channels |
| Face Film Thickness | 3.7–4.1 mil (approx. 0.094–0.104 mm) |
| Adhesive Type | Solvent-based pressure-sensitive acrylic adhesive |
| Adhesive Thickness | 1.6 mil (approx. 0.041 mm) |
| Initial Tack | Low Initial Tack, High Holding Power |
| Air-Release Channels | Yes |
| Release Liner | PET |
| Top Protective Film | PET, where supplied with the applicable finish or roll configuration |
| Directional Film | Yes — maintain a consistent film direction across adjacent panels |
| Application Method | Dry application |
| Recommended Installation Temperature | 20°C–30°C (68°F–86°F) |
| Service Temperature Range | −45°C to +45°C (−49°F to 113°F) |
| Roll Width | 60 in / 5 ft / 1.52 m |
| Full Roll Length | 59 ft / 19.7 yd / 18 m |
| Approx. Full Roll Weight | 28.7 lb / 13 kg |
| Expected Outdoor Service Life | Approx. 2 years, depending on climate, UV exposure, installation, parking conditions, and maintenance |
| Expected Indoor / Sheltered Service Life | 2-3 years, depending on use and maintenance |
| Installation Difficulty | Easy to Intermediate; DIY-friendly |
Technical Performance Data
| Test Item | Typical Result |
|---|---|
| Elongation at Break — MD | Approx. 200% |
| Elongation at Break — CD | Approx. 190% |
| Tensile Strength | 22.7 N/10 mm |
| Dimensional Stability | Shrinkage less than 4%* |
| Surface Tension | Approx. 34 dynes/cm |
| Release Force | 0.12 N/25 mm, tested at 25°C and 50% RH |
| Initial Tack | 1360 g/25 mm, tested at 26°C and 64% RH, GB31125-2014 |
| Peel Strength | 7.05 N/25 mm, tested at 25°C and 42% RH, GB/T2792-1998 |
| Holding Power | 72.09 h, tested at 25°C and 50% RH, GB/T4851-1998 |
| Aging Test 1 | 7 days at 65°C — no adhesive residue observed after removal with heat |
| Aging Test 2 | 10 days at 65°C — no adhesive residue observed after removal without heat |
Installation & Application
| Application Method | Dry application |
|---|---|
| Installation Temperature | 20°C–30°C (68°F–86°F) |
| Post-Heating | 95°C–110°C (203°F–230°F) |
| Curves & Recesses | Up to 120°C (248°F) |
| Directional Film | Yes — maintain consistent film direction across panels |
| Recommended Tools | Squeegee, knife, masking tape, magnets, gloves, heat gun, IR thermometer |
| Installation Notes | Avoid overstretching and overheating. Professional installation is recommended for complex curves and recesses. |
Care & Maintenance
| Washing | pH-neutral automotive shampoo; hand wash or touchless wash recommended |
|---|---|
| Pressure Washing | Below 2000 PSI; avoid spraying directly at exposed edges |
| Avoid | Brush car washes, abrasive cleaners, strong solvents, and harsh chemicals |
| Contaminants | Remove bird droppings, tree sap, fuel residue, and insects promptly |
| Wax & Sealant | Use vinyl-safe products only |
| Parking | Indoor, garage, or shaded parking recommended |
Lifespan & Warranty
| Outdoor Service Life | 2-3 years |
|---|---|
| Indoor / Sheltered Use | 2-3 years |
| Warranty | 2-Year Limited Warranty for eligible material defects |
| Warranty Exclusions | Improper installation, overstretching, overheating, misuse, accidents, environmental damage, incompatible chemicals, and pre-existing paint defects |
Storage & Shelf Life
| Shelf Life | Up to 2 years |
|---|---|
| Storage Temperature | 10°C–20°C (50°F–68°F) |
| Relative Humidity | Approx. 50% |
| Storage Conditions | Keep in original packaging in a clean, dry place away from direct sunlight, heat, dust, and moisture |
Frequently Asked Questions
RAXTiFY vinyl wrap is designed with air release channels to help reduce bubbles during installation, making it suitable for both professional installers and experienced DIY users.
However, installation difficulty may vary depending on the vehicle shape, surface condition, film finish, and installer experience. Full vehicle wraps, deep curves, bumpers, mirrors, chrome finishes, carbon fiber films, and other specialty finishes may require professional installation for the best result.
Yes. We recommend ordering a Small Size Sample before purchasing a full roll, especially if you are comparing colors or finishes.
Vinyl wrap color can look different under sunlight, shade, indoor lighting, camera settings, screen display, and different vehicle body lines. A sample helps you check the real color, finish, and texture before starting your wrap project.
Most RAXTiFY vinyl wraps come with a 2-year limited warranty against confirmed product-related defects.
This warranty does not cover improper installation, overheating, overstretching, scratches, accidents, harsh chemicals, normal wear and tear, environmental damage, paint damage during removal, or issues caused by poor surface condition.
Some specialty finishes, including chrome and 3D/5D/6D carbon fiber vinyl wraps, may not be eligible for the standard 2-year limited warranty.
For full details, please read our RAXTiFY Warranty Policy.
RAXTiFY vinyl wrap is designed to last approximately 2–3 years with proper installation and regular care.
Actual lifespan may vary depending on the film series, finish, climate, UV exposure, parking conditions, washing habits, and overall vehicle surface condition. Vehicles parked indoors or in shaded areas may help maintain the wrap’s appearance for longer.
For best results, hand wash the wrapped vehicle with clean water, pH-neutral soap, and a soft microfiber mitt or sponge. Dry the surface with a clean microfiber towel after washing.
Avoid harsh chemicals, abrasive cleaners, automatic car washes, polishing compounds, fuel spills, and high-pressure washing directly on film edges. Long-term exposure to intense sunlight, heat, rain, snow, dust, and pollution may affect the finish over time.
Yes. RAXTiFY vinyl wrap can be removed later when it is properly heated and removed with care.
Our vinyl wrap is designed to be removable without damaging factory OEM paint that is in good condition. For the safest result, we recommend professional removal, especially for full vehicle wraps, older installations, or vehicles with unknown paint history.
Please note that paint condition matters. Repainted surfaces, peeling clear coat, rust, dents, scratches, weak paint, or improper removal may increase the risk of paint damage.
Got your eyes on a color but not sure if it's the one? Get a FREE small sample first!